9999059 Dolphin 2x2 Gyro pool robot

The New Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner by Maytronics

The Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner is the ideal solution for cleaning large Commercial pools up to 60 metres in length. The 2 x 2 has two operating modes - Manual and Automatic. In Manual mode, the remote control can be used to direct the 2 x 2 to areas requiring special attention. The Automatic mode allows the 2 x 2 to learn the pools dimensions and computes a precise path to clean the entire pool floor and wall.

The Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner is a heavy duty cleaner for comercial pools. It cleans the pool floor, walls and waterline. Advanced software ensures systematic cleaning and optimal pool coverage. The 2 x 2 comes with combination brushes which are suitable for standard pools if you have a tiled pool then you will need to choose the Wonderbrush set.

The Dolphin 2 x 2 allows you to programme data via the remote control such as: 

• Pool length - 30, 40, 50 and 60 metres
• Pool shape - 90 degree corners, Hexagonal, Octagonal, Circular and Oval
• Cycle time - 10, 12, 14 and 16 hours
• Climbing / Non Climbing of pool walls or floor only

Benefits of the Dolphin 2 x 2 Pro Gyro Pool Cleaner: 

• User-friendly remote control for manual navigation and programmable command
• Powerful suction and sweeping, evenly disperses chlorine and other chemicals in the pool and helps to eliminate algae and germs
• Two large self contained ultra fine micronic filter bags collect dirt, debris and even fine dust particles
• Patented swivel prevents cable from tangling
• Low voltage motor - minimal power consumption
• Cycle time - 10, 12, 14 and 16 hours
• Cable length 40m. + Swivel and New Heavy Duty Caddy and Transformer
• Suction rate of: 32m³/h
• Complete with combinated brushes
• Comes with a 2 year warranty 

Options to choose between:

• Automatic cleaning (self-programming).
• User friendly remote control operation. The automatic scanning program can be modified and customized by the end user according to his needs by modifying the following parameters and cleaning programs:
• Regular (Regular) ?? cleaning program for floors and walls
• Ultra Clean? Slower movements for a more thorough cleaning
• Climbing (Climbing) ?? This option controls the frequency of climbing on the wall eg: at what frequency the DOLPHIN should climb on the walls. The default mode is non-climbing mode

Technical specifications

• Speed calculated on the floor 900 m / h
• Scanned percentage calculated 700 m2 / hour
• Pumping capacity (automatically controlled) 32 m3 / hr
• Filter bag
• Filter area (2 filter bags) 15,500 cnv
• 50 microns porosity
• Current consumption 170 W
• 27 VDC voltage
• Current 7 Amp
• Water resistance IP 54 (submersible)
• Input power supply 100 V / 115 V / 230 V - Output 27 VDC
• Capacity 330 W
• Electronic control
• Solid state digital motors
• Microcomputer brings 40 S.M.D.
• Self-monitoring
• Automatic switch-off
• Wireless remote control unit
• Transmission up to 50 m.
• 2 AAA batteries.
• Controller with user adjustable program.
• Remote control with manual programming.
• Robot weight (without cable) 18.80 kg.
• Cable length 40 m.