Recommended products for 500x300 cm Gre above-ground pool
If you have purchased a Gre above-ground pool measuring 500 x 300 cm, or intend to do so, it is good that you know which products are necessary for its installation and which are recommended to make the most of it.
This page was created precisely for this purpose, to give you advice on the installation and products to combine with your pool.
Delivery
If you are about to make a purchase, you need to know that with Zavattishop, shipping is free, but you must have a forklift for unloading at ground level upon delivery.
If you do not have a forklift, you must also add the hydraulic liftgate to your shopping cart, which costs €99.
In this way, we will send you the pool with a truck equipped with a hydraulic liftgate that will allow the heavy and large pallet containing the material to be unloaded at ground level:
Above-ground pool delivery with hydraulic liftgate
Products necessary for correct and durable installation
For the pool's support base, it is recommended to create a 15 cm quartz-smoothed concrete slab or, alternatively, 3-4 cm of well-compacted sand on a flat surface protected by a polyurethane cloth.
Below is a list of accessories that we recommend purchasing with the 500 x 300 cm Gre pool.
If the pool is to be buried, we recommend the polyurethane cloth to be placed around the pool walls to protect them from ground moisture.
Soft bottom mat 5.50 x 4 m for above-ground pool
Adhesive liner protection strip for steel pools - roll h 0.15 x 50 m
16.5 ml - Side protection mat for Gre inground pools
Lighting
To illuminate your above-ground pool, there is a specific type of lamp that does not require drilling or special arrangements. In fact, Seamaid above-ground pool lamps are installed on the pool's return fitting, nothing could be simpler. You can choose between a white LED lamp or a colorful RGB one:
Seamaid white LED spotlight for above-ground pools 18 Led 9W white spotlight
Seamaid multicolor LED spotlight for above-ground pools, 36 Led 8W
Cleaning
Pool cleaning is essential. Water is not purified only by water recirculation and chemical products.
Thorough cleaning of the bottom and walls is necessary, which can be done either manually (thanks to hydraulic cleaning systems) or automatically (thanks to electric robotic cleaners).
Pool Safety
Even with above-ground pools, safety should not take a back seat.
For easier access for children or the elderly, we highly recommend the resin safety ladder shown below.
Adjustable resin ladder for above-ground pool
Heating and Covering
Above-ground pools do not contain a large quantity of water. To prevent heat dispersion and retain the heat accumulated during the day, an isothermal cover is sufficient, which should be laid out in the evening and rolled up in the morning.
For the winter period, or when going on holiday and "abandoning" the pool for a few days, it is advisable to cover the pool with the appropriate 4-season cover, which will prevent dirt from getting into the water, allowing the water to be preserved from one season to the next.
Start-up and maintenance
After filling the pool, you will need to start the filtration system for up to 12 hours a day and chemically treat the water.
The main chemical products to always have available are: DIKLOR SUPER, ALGASTOP, TABLOK SUPER and PH, which you can purchase in our Summer Kit.
The filtration system also requires constant maintenance: it is advisable to backwash frequently and, from time to time, replace the glass sand.