Recommended Products for Gre 1000x550 cm Above Ground Pool
If you have purchased a Gre above ground pool measuring 1000 x 550 cm, or intend to do so, it is important to know which products are necessary for its installation and which are recommended to make the most of it.
This page was created precisely for this purpose: to give you advice on installation and on the products to combine with your pool.
Delivery
If you are about to make a purchase, you need to know that with Zavattishop, shipping is free, but you must have a forklift for unloading at ground level upon delivery.
If you do not have a forklift, you must also add the hydraulic liftgate to your shopping cart, which costs €99.
In this way, we will send your pool with a truck equipped with a hydraulic liftgate that will allow the heavy and large pallet containing the material to be unloaded at ground level:
Above ground pool delivery with hydraulic liftgate
Products necessary for correct and durable installation
For the pool's support base, it is recommended to create a 15 cm quartz-smoothed concrete slab or, alternatively, 3-4 cm of well-compressed sand on a flat surface protected by a polyurethane mat may suffice.
Below is a list of accessories we recommend purchasing with the 1000 x 550 cm Gre pool.
If the pool is to be inground, we recommend a polyurethane mat to be placed around the pool walls to protect them from ground humidity.
Soft base mat 5.50 x 4 m for above ground pool
Adhesive liner protection strip for sheet metal pool - roll h 0.15 x 50 m
16.5 ml - Side protection mat for inground Gre pools
Lighting
To illuminate your above ground pool, there is a specific type of lamp that does not require drilling or special preparations. In fact, Seamaid above ground pool lamps are installed on the pool's return fitting, nothing could be simpler. You can choose between a white LED lamp or a colored RGB one:
Seamaid white LED light for above ground pools 18 Led 9W white light
Multi-color LED light for above ground pools, Seamaid, 36 Led 8W
Cleaning
Pool cleaning is essential. Water is not only purified by water recirculation and chemical products.
Thorough cleaning of the bottom and walls is necessary, which can be done either manually (thanks to hydraulic cleaning systems) or automatically (thanks to electric robotic cleaners).
Dolphin E30 robotic pool cleaner total cleaning
Pool Safety
Even in above ground pools, safety should not be overlooked.
For easy access for children or the elderly, we highly recommend the resin safety ladder shown below.
Adjustable resin ladder for above ground pool
Heating and Covering
Above ground pools do not contain a large quantity of water, so to avoid heat loss and retain the heat accumulated during the day, an isothermal cover is sufficient, which should be spread out in the evening and rolled up in the morning.
For the winter period, or when going on vacation and "abandoning" the pool for a few days, it is advisable to cover the pool with the appropriate 4-season cover, which will prevent dirt from entering the water, allowing the water to be preserved from one season to the next.
Start-up and Maintenance
After filling the pool, you will need to start the filtration system for up to 12 hours a day and chemically treat the water.
The main chemical products to always have available are: DIKLOR SUPER, ALGASTOP, TABLOK SUPER, and PH, which you can purchase in our Summer Kit.
The filtration system also requires constant maintenance: it is advisable to backwash frequently and, from time to time, replace the glass sand.