Recommended products for 300 cm diameter Gre above-ground pools
If you have purchased an above-ground Gre pool with a diameter of 300 cm, or intend to do so, it is good to know which products are necessary for its installation and which are recommended for making the most of it.
This page is created precisely for this purpose, to give you advice on installation and products to combine with your pool.
Delivery
If you are about to make a purchase, you need to know that with Zavattishop, shipping is free, but you must have a forklift for unloading at delivery.
If you do not have a forklift, you must also add the hydraulic liftgate to your shopping cart, which costs €99.
In this way, we will send you the pool for delivery with a truck equipped with a hydraulic liftgate, which will allow the heavy and large pallet containing the material to be unloaded at ground level:
Above-ground pool delivery with hydraulic liftgate
Products needed for a correct and durable installation
For the pool base, it is recommended to create a 15 cm quartz-smoothed concrete slab or, alternatively, 3-4 cm of well-compacted sand on a flat surface protected by a polyurethane cloth may suffice.
Below is a list of accessories we recommend purchasing with the 300 cm diameter Gre pool.
If the pool is inground, we recommend placing a polyurethane cloth around the pool walls to protect them from soil moisture.
Soft bottom mat 5.50 x 4 m for above-ground pools
Adhesive liner protection strip for sheet metal pools - roll h 0.15 x 50 m
16.5 ml - Side protection mat for inground Gre pools
Lighting
To illuminate your above-ground pool, there is a specific type of lamp that does not require drilling or special preparations; in fact, Seamaid above-ground pool lamps are installed on the pool's return fitting, nothing could be simpler. You can choose between a white LED lamp or a colored RGB one:
Seamaid white LED spotlight for above-ground pools 18 Led 9W white spotlight
Seamaid multicolor LED spotlight for above-ground pools, 36 Led 8W
Cleaning
Pool cleaning is essential. Water is not purified solely through water recirculation and chemical products.
Thorough cleaning of the bottom and walls is necessary, which can be done either manually (using hydraulic cleaning systems) or automatically (using robotic pool cleaners).
Dolphin E30 robotic pool cleaner for total cleaning
Pool Safety
Even in above-ground pools, safety should not take a back seat.
For easier access for children or the elderly, we strongly recommend the resin safety ladder shown below.
Adjustable resin ladder for above-ground pools
Heating and Closing
Above-ground pools do not contain a large quantity of water; to avoid heat loss and retain the heat accumulated during the day, an isothermal cover is sufficient, which should be spread in the evening and rolled up in the morning.
For the winter period, or when going on vacation and "abandoning" the pool for a few days, it is advisable to cover the pool with the appropriate 4-season cover, which will prevent dirt from getting into the water, allowing the water to be preserved from one season to the next.
Start-up and Maintenance
After filling the pool, it will be necessary to start the filtration system for up to 12 hours a day and chemically treat the water.
The main chemical products to always have available are: DIKLOR SUPER, ALGASTOP, TABLOK SUPER, and PH, which you can purchase in our Summer Kit.
The filtration system also requires constant maintenance: frequent backwashes are advisable, and from time to time, the glass sand should be replaced.