Recommended products for Gre 350 cm diameter above-ground pools
If you have purchased or are planning to purchase a Gre above-ground pool with a diameter of 350 cm, it is important to know which products are necessary for its installation and which are recommended for optimal use.
This page was created specifically for this purpose, to provide advice on installation and on the products to combine with your pool.
Delivery
If you are about to make a purchase, you need to know that with Zavattishop, shipping is free, but you must have a forklift for unloading at delivery.
If you do not have a forklift, you must also add the hydraulic lift gate to your shopping cart, which costs €99.
This way, we will send the pool for delivery with a truck equipped with a hydraulic lift gate, which will allow for the unloading of the heavy and large pallet containing the material:
Above-ground pool delivery with hydraulic lift gate
Products necessary for correct and durable installation
For the pool's base, it is recommended to create a 15 cm quartz-smoothed concrete slab or, alternatively, 3-4 cm of well-compressed sand on a flat surface protected by a polyurethane mat may suffice.
Below is a list of accessories we recommend purchasing with the Gre 350 cm diameter pool.
If the pool is to be buried, we recommend a polyurethane mat to be placed around the pool walls to protect them from ground moisture.
Soft bottom mat 5.50 x 4 m for above-ground pool
Adhesive liner protection strip for sheet metal pools - roll h 0.15 x 50 m
16.5 ml - Side protection mat for Gre inground pools
Lighting
To illuminate your above-ground pool, there is a specific type of lamp that does not require special drilling or preparation. Seamaid above-ground pool lamps are simply installed on the pool's inlet, nothing could be easier. You can choose between a white LED lamp or a colored RGB one:
Seamaid white LED spotlight for above-ground pools 18 Led 9W white spotlight
Seamaid multicolor LED spotlight for above-ground pools, 36 Led 8W
Cleaning
Pool cleaning is essential. Water is not purified solely by water recirculation and chemicals.
Thorough cleaning of the bottom and walls is necessary, which can be done manually (thanks to hydraulic cleaning systems) or automatically (thanks to robotic pool cleaners).
Dolphin E30 pool cleaner robot for complete cleaning
Pool Safety
Even with above-ground pools, safety should not be overlooked.
For easier access for children or the elderly, we strongly recommend the resin safety ladder shown below.
Adjustable resin ladder for above-ground pool
Heating and Covering
Above-ground pools do not hold a large amount of water. To prevent heat loss and retain the heat accumulated during the day, an isothermal cover is sufficient, which should be spread out in the evening and rolled up in the morning.
For the winter period, or when going on vacation and leaving the pool unattended for a few days, it is advisable to cover the pool with the appropriate 4-season cover, which will prevent dirt from getting into the water, allowing the water to be preserved from one season to the next.
Start-up and Maintenance
After filling the pool, the filtration system will need to be run for up to 12 hours a day and the water chemically treated.
The main chemicals to always have on hand are: DIKLOR SUPER, ALGASTOP, TABLOK SUPER and PH, which you can purchase in our Summer Kit.
The filtration system also requires constant maintenance: it is advisable to backwash frequently and, from time to time, replace the glass sand.