Why use liquid pool chemicals
Chemical treatment is a fundamental part of pool care. In addition to a robot and filtration system, it is important to choose the right chemicals. Chemical treatment must be carried out constantly, which is why liquid chemicals, being much more practical, are the best choice.
They do not need to be dissolved in water and guarantee safe, easy, and fast pool water disinfection!
Chlorine - Liquid Klor
Liquid chlorine is widely used in pools with automatic dispensers and is convenient because it only needs to be poured, with no other special precautions. This product has high stability to photolysis and evaporation. In addition to disinfection, it also performs an oxidizing function, thus eliminating unfiltered organic substances.
Dosage: maintain a free chlorine level between 0.8 and 1 ppm (5.4 to 6.7 gr/m3 of Chlorex 14).
For shock treatments, 5 to 10 ppm of free chlorine depending on the concentration of combined chlorine (34 to 68 gr/m3 of Chlorex 14).
Algaecide - Algastop
A specific product to prevent and inhibit algae formation in the pool. This super concentrated product should be poured into the skimmer, balance tank, or floating dispenser. Our Algastop is a solution that prevents algae formation and works correctly only when chlorine and pH are stabilized. The use of algaecide is advisable only during the warmer weeks, during the summer season, and, of course, in conjunction with pool use.
Dosage: initial treatment: 50-100 gr/m³. Maintenance: 20-30 gr/m³.
Use with appropriate dosing systems or disperse directly into the pool.
Winterizer - Winter Algastop
Winterizer is a specific algaecide for winter use, as it prevents algae formation in your pool throughout the closing period.
Dosage: at the end of the summer season, before closing, perform a superchlorination (3 kg of granular chlorine per 100m3). Afterward, add 10 liters of winterizer per 100 m3. It is advisable to adjust the pH between 7.2 and 7.6.ZSHOP-14905
pH Increaser - pH Plus
pH Plus is a super concentrated pH increaser to be poured into the skimmer, balance tank, or floating dispenser. pH in a pool is absolutely fundamental, as for other chemicals to work correctly, the pH must be between 7.2 and 7.6.
Dosage: approximately 200 - 300 gr of product per 100 m³ of water to increase the pH by 0.1 units.
Disperse the product directly into the pool.
pH Reducer - pH Minus
Colorless liquid product based on sulfuric acid for reducing the pH value of pool water in cases of excessively high acidity values. Ideal for traditional treatments or with automatic dosing systems.
Dosage: approximately 200 - 300 gr of product per 100 m³ of water to increase the pH by 0.1 units.
Disperse the product directly into the pool.
Iron and Limescale Sequestrant - Sequat
Specific chemical product to eliminate, prevent, and reduce the accumulation of ferrous and calcareous substances that make your pool water yellowish or cloudy. Furthermore, it makes it easier for the robotic cleaner to vacuum up limescale particles present in the pool.
Dosage: for 100 m3 of water, as a first treatment, 4 liters are needed immediately.
Then for maintenance, 2 liters every 3 days until the product runs out.
Flocculant - Extra Flock
A specific product for eliminating oily and greasy particles from your pool. Dirt particles are "colloidal," meaning they are so small that they cannot be retained within the filter sand, which is why flocculant is necessary.
The product works very simply: when hydrated, it increases its volume. At this point, the hydrated molecules bind to each other, forming cross-linked flakes that deposit on the filter sand, increasing its filtering power: thus, the sand filter's ability to retain even the smallest impurities increases.
Dosage: pour 200-250 gr of diluted product per 100 m³ of pool capacity into the skimmer.
Antifoam - No Foam
Extremely effective in reducing foam from any type of detergent. No Foam serves to minimize the presence and formation of foam in tanks.
Dosage: 10 to 100 mg/liter depending on the conditions of use.
Descaler - No Krust
If your pool is empty, you can use NoKrust descaler to eliminate and prevent scaling inside and outside the tank. The product is super concentrated and should be poured onto a cloth and rubbed onto the affected area.
Oxygen - Oxyplus
If you want to reduce the use of chlorine, you can use active oxygen for pool disinfection. For initial treatment, 60 gr of product per m3 of water is recommended, to be combined with an algaecide.