Basic winter cover 4 x 12 m for swimming pools

Rectangular cover measuring 4 x 12 m, suitable for covering inground pools.

5-year warranty on heat seals.

Winter cover produced at our factory in Poggio Rusco (Mn) by specialized technicians, masters in the use of the most modern heat-sealing technologies, adapting the process to the external temperature to avoid imperfections. The sheet is created directly from the reinforced polyethylene roll, hand-finishing any imperfections.

Advantages of the basic inground pool cover

• protects the water from debris and dirt, prevents leaves and organisms from altering the pool's pH conditions.

• shields the water from solar rays, which are the main cause of chlorine evaporation and the consequent proliferation of microorganisms like algae. Can be used as a summer isothermal cover.

• eliminates the need for chemicals thanks to protection from UV rays and organic substances. A shock treatment combined with winterizing agent is enough to face the cold.

• allows significant savings, as the system is no longer used, reducing electricity consumption and eliminating the purchase of chemicals.

Technical characteristics of the basic winter pool cover

• fine mesh carbon reinforcement, essential for resistance to tearing and wear over time

• 220gr/m2 PVC-coated polyethylene, best weight/strength ratio to increase mobility without sacrificing strength

• self-stabilizing, high resistance to degradation from temperature fluctuations due to thermal excursions

• very high capacity to maintain a stable temperature to block the proliferation of bacteria

• waterproofing necessary for protection from rainwater that alters the pH value

• no seams for excellent tensile strength, a necessary feature to withstand bad weather

• 99% guaranteed waterproof

5-year warranty on heat seals

Useful tips for installing the winter pool cover

1. To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.

2. Use the Clean Cover pump with water drainage kit (available in related products) to limit water accumulation on the cover during heavy rain and keep the cover dry.

3. For optimal installation, place the cover near the edge of the pool, lift the two corners, and proceed to the opposite edge. Our covers are folded accordion-style to ensure quick pool closing.

4. Perform proper winterization with granular chlorine Diklor Super (30gr/m3) and winterizing agent Winter Algastop (1L per 10m3), to be added one after the other.