Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina 3 x 15 m
Copertura invernale base 4 x 16 m per piscina

BASE4X16

Winter pool cover 4 x 16 m

€ 379,00
€ 758,00
€ 379,00
Tax included.

Rectangular winter cover, 4 x 16 m. Basic cover.

Disponibile

Options:
Descrizione

Rectangular cover measuring 4 x 16 m, suitable for covering inground pools.

5-year warranty on heat seals.

Winter cover produced at our factory in Poggio Rusco (Mn) by specialized technicians, masters in the use of the most modern heat sealing technologies, adapting the process to the external temperature to avoid imperfections. The cover is created directly from the armed polyethylene roll, with any imperfections finished by hand.

Advantages of the basic cover for inground pools

  • protects the water from debris and dirt, prevents leaves and organisms from altering the pool's pH conditions.

  • shields the water from solar rays which are the main cause of chlorine evaporation and the consequent proliferation of microorganisms such as algae. Can be used as a summer isothermal cover.

  • eliminates the need for chemical substances thanks to protection from UV rays and organic substances. A shock treatment combined with winterizer is enough to face the cold.

  • allows for significant savings, as the system is no longer used, reducing electricity consumption and eliminating the purchase of chemicals.

Technical characteristics of the basic winter pool cover

  • fine-mesh carbon reinforcement, essential for resistance to tearing and wear over time

  • 220gr/m2 PVC-coated polyethylene, best weight/strength ratio to increase mobility without sacrificing strength

  • self-stabilizing, high resistance to degradation from temperature changes due to thermal excursion

  • very high capacity to maintain stable temperature to block bacterial proliferation

  • waterproofing necessary for protection from rainwater that alters the pH value

  • no seams for excellent tensile strength, a necessary feature to combat bad weather

  • 99% guaranteed impermeability

5-year warranty on heat seals

Useful tips for laying the winter pool cover

  1. To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.

  2. Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during heavy rains and keep the cover dry.

  3. For optimal installation, place the cover near the edge of the pool, lift the two corners and proceed towards the opposite edge. Our covers are folded accordion-style to ensure quick pool closure.

  4. Perform correct winterization with granular chlorine Diklor Super (30gr/m3) and winterizer Winter Algastop (1L per 10m3) to be applied one after the other.

 
 
Instructions for proper installation of the winter cover:
  • At least 50 cm of space around the pool is required for the tubular supports and to ensure cover stability.
  • If the pool has skimmers, it is important to consider that 20 cm of the cover is lost on each side to compensate for the difference in level between the edge and the water.
  • To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.
  • Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during heavy rains and keep the cover dry. It is also very important to prevent water from escaping from under the cover due to the principle of communicating vessels.
  • THE TUBULARS MUST BE FILLED TO 50%

N.B. If you have a salt-treated pool, please note that electrolysis significantly reduces the life and resistance of the cover.

How to close the pool?

  1. Clean the bottom of the pool with the robot
  2. Perform backwash and check that the pump pre-filter is clean
  3. Check pH values (7.2 / 7.6)
  4. Perform super chlorination with Diklor Super
  5. Add Winter Algastop to prevent algae formation
  6. Leave the system on for at least 24 hours
  7. Cover the pool with the winter cover
  8. Use the cover emptying pump to keep the cover dry and clean
  9. If temperatures are high, leave the system on during the hottest hours
  10. Leave the valves open and DO NOT lower the water level

    Piscina coperta con il telo invernale in modo corretto

FOR VAT HOLDERS, THE COVER IS 100% DEDUCTIBLE


FREE insured shipping against loss and damage: The cover is shipped with express courier and the shipment is insured. In case of loss or damage, a new cover will be sent within 2 working days of the request.
FREE "Pro" consultation: In case of difficulty in use or installation, you can request technical assistance through major communication channels such as phone, fax, email or through new technological channels such as Whatsapp and iMessage at 334/1491755 or live chat.
Official 5-YEAR "NO PROBLEM" assistance: If during the first 5 years your cover shows manufacturing defects in the heat seals, you can count on our assistance within 48 hours.


MADE TO LAST
Our winter pool cover stems from the idea that, if the materials are of high quality and treated correctly, it can last many years.
Reinforced: Carbon reinforcement, essential for resistance to tearing and wear over time.
220gr/m2: Best weight/strength ratio to increase mobility without sacrificing strength
Self-stabilizing: High resistance to degradation from temperature changes due to thermal excursion.
Insulating: Very high capacity to maintain stable temperature to block bacterial proliferation.
Water repellent: Waterproofing necessary for protection from rainwater that alters the pH value.
No seams: Excellent tensile strength, a necessary feature to combat bad weather.

Prodotti correlati

Spedizione gratuita e veloce

Per gli ordini superiori a 200€ (esclusa specifica indicazione). Invio entro 48 ore.

Scopri di più

Multisupporto

Chiamaci, inviaci una mail, un messaggio o un Whatsapp al +39 3341491755

Scopri di più

Metodo di pagamento

Paga con carta di credito, Paypal, Scalapay, AmazonPay, bonifico o contanti al corriere.

Scopri di più