Copertura invernale base 5 x 6 m per piscina 4 x 5 m
Copertura invernale base 5 x 6 m per piscina 4 x 5 m facile da posare
Copertura invernale base 5 x 6 m per piscina 4 x 5 m nero sotto e verde sopra
Copertura invernale base 5 x 6 m per piscina 4 x 5 m dettaglio telo
Copertura invernale base 5 x 6 m per piscina 4 x 5 m sagomabile non sfilaccia
Copertura invernale base 5 x 6 m per piscina 4 x 5 m stesura semplice
Copertura invernale base 5 x 6 m per piscina 4 x 5 m prodotta in italia
Copertura invernale base 5 x 6 m per piscina
Copertura invernale base 5 x 6 m per piscina 4 x 5 m
Copertura invernale base 5 x 6 m per piscina 4 x 5 m facile da posare
Copertura invernale base 5 x 6 m per piscina 4 x 5 m nero sotto e verde sopra
Copertura invernale base 5 x 6 m per piscina 4 x 5 m dettaglio telo
Copertura invernale base 5 x 6 m per piscina 4 x 5 m sagomabile non sfilaccia
Copertura invernale base 5 x 6 m per piscina 4 x 5 m stesura semplice
Copertura invernale base 5 x 6 m per piscina 4 x 5 m prodotta in italia
Copertura invernale base 5 x 6 m per piscina
Copertura invernale base 5 x 6 m per piscina 4 x 5 m
Copertura invernale base 5 x 6 m per piscina 4 x 5 m facile da posare
Copertura invernale base 5 x 6 m per piscina 4 x 5 m nero sotto e verde sopra
Copertura invernale base 5 x 6 m per piscina 4 x 5 m dettaglio telo
Copertura invernale base 5 x 6 m per piscina 4 x 5 m sagomabile non sfilaccia
Copertura invernale base 5 x 6 m per piscina 4 x 5 m stesura semplice
Copertura invernale base 5 x 6 m per piscina 4 x 5 m prodotta in italia
Copertura invernale base 5 x 6 m per piscina

BASE5X6

Winter cover base 5 x 6 m for swimming pool

€ 179,00
€ 358,00
€ 179,00
Tax included.

Winter pool cover, rectangular, 5 x 6 m. Standard cover.

Disponibile

Options:
Descrizione

Rectangular cover measuring 5 x 6 m, suitable for covering inground pools.

5-year warranty on heat seals.

Winter cover produced at our factory in Poggio Rusco (Mn) by specialized technicians, masters in the use of the most modern heat-sealing technologies, adapting the process to the external temperature to avoid imperfections. The cover is created directly from the reinforced polyethylene roll, with any imperfections finished by hand.

Advantages of the basic inground pool cover

  • protects the water from debris and dirt, preventing leaves and organisms from altering the pool's pH conditions.

  • shields the water from solar rays which are the main cause of chlorine evaporation and the consequent proliferation of microorganisms like algae. Can be used as an isothermal summer cover.

  • eliminates the need for chemicals thanks to protection from UV rays and organic substances. A shock treatment combined with winterizing agent is sufficient to face the cold.

  • allows significant savings, as the system is no longer used, reducing electricity consumption and eliminating the need to purchase chemicals.

Technical characteristics of the basic winter cover

  • fine-mesh carbon reinforcement, essential for resistance to tearing and wear over time

  • 220gr/m2 PVC coated polyethylene, best weight/strength ratio to increase mobility without sacrificing strength

  • self-stabilizing, highly resistant to degradation from temperature fluctuations due to thermal excursions

  • very high capacity to maintain a stable temperature to block the proliferation of bacteria

  • waterproofing necessary for protection from rainwater that alters the pH value

  • no seams for excellent tensile strength, a characteristic necessary to combat bad weather

  • 99% guaranteed impermeability

5-year warranty on heat seals

Useful tips for installing the winter pool cover

  1. To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from the ground level.

  2. Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry.

  3. For optimal installation, place the cover near the edge of the pool, lift the two corners, and proceed towards the opposite edge. Our covers are accordion-folded to ensure quick pool closing.

  4. Perform proper winterization with granular chlorine Diklor Super (30gr/m3) and winterizing agent Winter Algastop (1L per 10m3) to be added one after the other.

 
 
Instructions for professional installation of the winter cover:
  • Around the pool, at least 50 cm of space is required for supporting the tubes and ensuring the cover's stability.
  • If the pool has a skimmer, it is important to consider that on each side, 20 cm of the cover is lost to compensate for the difference in level between the edge and the water.
  • To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from the ground level.
  • Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry. It is also very important to prevent water from escaping from under the cover due to the principle of communicating vessels.
  • THE TUBES SHOULD BE FILLED TO 50%

N.B. If you have a saltwater pool, please remember that electrolysis significantly reduces the lifespan and resistance of the cover.

How to close the pool?

  1. Clean the bottom of the pool with a robot
  2. Perform backwashing and check that the pump's pre-filter is clean
  3. Check the pH values (7.2 / 7.6)
  4. Perform a super chlorination with Diklor Super
  5. Add Winter Algastop to prevent algae formation
  6. Leave the system on for at least 24 hours
  7. Cover the pool with the winter cover
  8. Use the cover emptying pump to keep the cover dry and clean
  9. If temperatures are high, leave the system on during the hottest hours
  10. Leave the valves open and DO NOT lower the water level

    Piscina coperta con il telo invernale in modo corretto

FOR VAT REGISTERED COMPANIES, THE COVER IS 100% TAX DEDUCTIBLE  

 
FREE insured shipping against loss and damage: The cover is shipped with express courier and the shipment is insured. In case of loss or damage, a new cover will be sent within 2 business days of the request.
FREE "Pro" Consultation: In case of difficulty in use or installation, you can request technical assistance through major communication channels such as phone, fax, email or through new technological channels such as Whatsapp and iMessage at 334/1491755 or live chat.
Official 5 YEAR "NO PROBLEM" Assistance: If during the first 5 years your cover shows manufacturing defects in the heat seals, you can count on our assistance within 48 hours.


MADE TO LAST
Our winter pool cover is based on the idea that if the materials are of high quality and treated correctly, it can last for several years.
Reinforced: Carbon reinforcement, essential for resistance to tearing and wear over time.
220gr/m2: Best weight/strength ratio to increase mobility without sacrificing strength.
Self-stabilizing: High resistance to degradation from temperature fluctuations due to thermal excursions.
Insulating: Very high capacity to maintain a stable temperature to block the proliferation of bacteria.
Water repellent: Waterproofing necessary for protection from rainwater that alters the pH value.
No seams: Excellent tensile strength, a characteristic necessary to combat bad weather.

Prodotti correlati

Spedizione gratuita e veloce

Per gli ordini superiori a 200€ (esclusa specifica indicazione). Invio entro 48 ore.

Scopri di più

Multisupporto

Chiamaci, inviaci una mail, un messaggio o un Whatsapp al +39 3341491755

Scopri di più

Metodo di pagamento

Paga con carta di credito, Paypal, Scalapay, AmazonPay, bonifico o contanti al corriere.

Scopri di più