Copertura invernale base 7 x 10 m per piscina 6 x 9 m

Copertura invernale base 7 x 10 m per piscina

SKU:A69

7 x 10 m basic winter cover for swimming pools

Regular price: € 419,00
Regular price: ~~€ 838,00~~
Sale price: € 419,00

Tax included.

Rectangular 10 x 7 m winter cover. Basic cover.

Product variants:

Disponibile

Options:

Added Clean Cover Kit: version with tarp drain pump + drain kit € 239,00 Addition of Tarp Bag: version with container for winter tarp storage € 20,00

Descrizione

Rectangular tarpaulin measuring 7 x 10 m, suitable for covering in-ground swimming pools.

5-year warranty on heat seals.

Winter cover produced at our factory in Poggio Rusco (Mn) by specialized technicians, masters in the use of the most modern heat-sealing technologies, adapting the process to the external temperature to avoid imperfections. The tarpaulin is created directly from the reinforced polyethylene roll, hand-finishing any imperfections.

Advantages of the basic cover for in-ground swimming pools

protects the water from debris and dirt, prevents leaves and organisms from altering the pool's pH conditions.
screens the water from solar rays, which are the main cause of chlorine evaporation and the consequent proliferation of microorganisms like algae. Can be used as a summer isothermal cover.
eliminates the use of chemicals thanks to protection from UV rays and organic substances. A shock treatment combined with winterizing agent is enough to face the cold.
allows significant savings, as the system is no longer used, reducing electricity consumption and eliminating the need to purchase chemicals.

Technical characteristics of the basic winter cover

fine-mesh carbon reinforcement, essential for resistance to tears and wear over time
220gr/m2 PVC coated polyethylene, best weight/strength ratio to increase mobility without sacrificing strength
self-stabilizing, high resistance to degradation from temperature fluctuations due to thermal excursion
very high capacity to maintain stable temperature to block bacteria proliferation
waterproofing necessary for protection from rainwater that alters the pH value
no seams for excellent tensile strength, a characteristic necessary to combat bad weather
99% guaranteed waterproofing

5-year warranty on heat seals

Useful tips for installing the winter pool cover

To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.
Use the Clean Cover pump with water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry.
For optimal installation, place the cover near the edge of the pool, lift the two corners, and proceed towards the opposite edge. Our covers are folded accordion-style to ensure quick pool closing.
Perform correct winterization with granular chlorine Diklor Super (30gr/m3) and winterizing agent Winter Algastop (1L per 10m3) to be added one after the other.

Instructions for professional winter cover installation:

Around the pool, a space of at least 50 cm is required for placing the water tubes and to ensure the cover's stability.
If the pool is a skimmer type, it's important to note that 20 cm of cover is lost on each side to compensate for the difference in level between the edge and the water.
To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.
Use the Clean Cover pump with a water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry. This is also very important to prevent water from escaping from under the cover due to the communicating vessels principle.
THE TUBULARS MUST BE FILLED TO 50%

N.B. If you have a saltwater pool, please remember that electrolysis significantly reduces the cover's durability and resistance.

How to close the pool?

Clean the pool bottom with a robot
Perform backwash and check that the pump pre-filter is clean
Check pH values (7.2 / 7.6)
Perform super chlorination with Diklor Super
Add Winter Algastop to prevent algae formation
Leave the system on for at least 24 hours
Cover the pool with the winter cover
Use the cover pump to keep the cover dry and clean
If temperatures are high, leave the system on during the warmest hours
Leave valves open and DO NOT lower the water level

FOR VAT REGISTERED COMPANIES, THE TARPAULIN IS 100% TAX DEDUCTIBLE

FREE insured shipping against loss and damage: The cover is shipped by express courier and shipping is insured. In case of loss or damage, a new cover will be sent within 2 working days of the request.
FREE "Pro" consultation: In case of difficulty in use or installation, you can request technical assistance through major communication channels such as phone, fax, email or through new technological channels such as Whatsapp and iMessage at 334/1491755 or live chat.
Official 5-YEAR "NO PROBLEM" assistance: If during the first 5 years your cover shows manufacturing defects in the heat seals, you can count on our assistance within 48 hours.

MADE TO LAST
Our winter pool cover is based on the idea that if the materials are of high quality and treated correctly, it can last for several years.
Reinforced: Carbon reinforcement, essential for resistance to tears and wear over time.
220gr/m2: Best weight/strength ratio to increase mobility without sacrificing strength.
Self-stabilizing: High resistance to degradation from temperature fluctuations due to thermal excursion.
Insulating: Very high capacity to maintain stable temperature to block bacteria proliferation.
Water repellent: Waterproofing necessary for protection from rainwater that alters the pH value.
No seams: Excellent tensile strength, a necessary characteristic to combat bad weather.