Copertura invernale base 8 x 20 m per piscina 7 x 19 m
Copertura invernale base 8 x 20 m per piscina 7 x 19 m posa telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m appoggiata all'acqua
Copertura invernale base 8 x 20 m per piscina 7 x 19 m nero verde
Copertura invernale base 8 x 20 m per piscina 7 x 19 m dettaglio telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m sagomata
Copertura invernale base 8 x 20 m per piscina 7 x 19 m produzione italiana
Copertura invernale base 8 x 20 m per piscina
Copertura invernale base 8 x 20 m per piscina 7 x 19 m
Copertura invernale base 8 x 20 m per piscina 7 x 19 m posa telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m appoggiata all'acqua
Copertura invernale base 8 x 20 m per piscina 7 x 19 m nero verde
Copertura invernale base 8 x 20 m per piscina 7 x 19 m dettaglio telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m sagomata
Copertura invernale base 8 x 20 m per piscina 7 x 19 m produzione italiana
Copertura invernale base 8 x 20 m per piscina
Copertura invernale base 8 x 20 m per piscina 7 x 19 m
Copertura invernale base 8 x 20 m per piscina 7 x 19 m posa telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m appoggiata all'acqua
Copertura invernale base 8 x 20 m per piscina 7 x 19 m nero verde
Copertura invernale base 8 x 20 m per piscina 7 x 19 m dettaglio telo
Copertura invernale base 8 x 20 m per piscina 7 x 19 m sagomata
Copertura invernale base 8 x 20 m per piscina 7 x 19 m produzione italiana
Copertura invernale base 8 x 20 m per piscina

BASE8X20

8 x 20 m basic winter cover for swimming pools

€ 959,00
€ 1.918,00
€ 959,00
Tax included.

Winter pool cover, 8 x 20 m rectangular. Basic cover.

Disponibile

Options:
Descrizione

Rectangular cover measuring 8 x 20 m, suitable for covering inground pools.

5-year warranty on heat seals.

Winter cover produced at our factory in Poggio Rusco (Mn) by specialized technicians, masters in the use of the most modern heat-sealing technologies, adapting the process to the external temperature to avoid imperfections. The sheet is created directly from the reinforced polyethylene roll, hand-finishing any imperfections.

Advantages of the basic inground pool cover sheet

  • protects the water from debris and dirt, prevents leaves and organisms from altering the pool's pH conditions.

  • shields the water from solar rays, which are the main cause of chlorine evaporation and the consequent proliferation of microorganisms like algae. Can be used as a summer isothermal cover.

  • eliminates the use of chemical substances thanks to protection from UV rays and organic substances. A shock treatment combined with winterizer is enough to face the cold.

  • allows for significant savings; the system stops being used, reducing electricity, and the purchase of chemicals is halted.

Technical characteristics of the basic winter cover sheet

  • fine-mesh carbon reinforcement, essential for resistance to tears and wear over time

  • 220gr/m2 PVC coated polyethylene, best weight/strength ratio to increase mobility without sacrificing strength

  • self-stabilizing, high resistance to degradation from temperature fluctuations due to thermal excursion

  • very high capacity to maintain stable temperature to block the proliferation of bacteria

  • waterproofing necessary for protection from rainwater which alters the pH value

  • no seams for excellent tensile strength, a necessary feature to combat bad weather

  • 99% guaranteed waterproof

5-year warranty on heat seals

Useful tips for installing the winter pool cover

  1. To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.

  2. Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry.

  3. For optimal installation, place the cover near the edge of the pool, lift the two corners, and proceed towards the opposite edge. Our covers are folded accordion-style to ensure quick closing of the pool.

  4. Perform correct winterization with granular chlorine Diklor Super (30gr/m3) and winterizer Winter Algastop (1L per 10m3) to be added one after the other.

 
 
Instructions for professional winter cover installation:
  • Around the pool, at least 50 cm of space is needed for the tubes to rest and to ensure stability for the cover.
  • If the pool has skimmers, it is important to consider that 20 cm of the cover is lost on each side to compensate for the difference in level between the edge and the water.
  • To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.
  • Use the Clean Cover pump for emptying covers with a water drainage kit (available in related products) to limit accumulation on the cover during persistent rain and keep the cover dry. It is also very important to prevent water from coming out from under the cover due to the principle of communicating vessels.
  •  THE TUBES MUST BE FILLED TO 50%

N.B. If you have a saltwater pool, please remember that electrolysis significantly reduces the cover's lifespan and resistance.

How to close the pool?

  1. Clean the bottom of the pool with a robot
  2. Perform backwashing and check that the pump's pre-filter is clean
  3. Check pH values (7.2 / 7.6)
  4. Perform a super chlorination with Diklor Super
  5. Add Winter Algastop to prevent algae formation
  6. Leave the system on for at least 24 hours
  7. Cover the pool with the winter cover
  8. Use the cover emptying pump to keep the cover dry and clean
  9. If temperatures are high, leave the system on during the hottest hours
  10. Leave the valves open and DO NOT lower the water level

    Piscina coperta con il telo invernale in modo corretto

FOR VAT HOLDERS, THE COVER IS 100% DEDUCTIBLE  

 
Free insured shipping against loss and damage: The cover is shipped by express courier and the shipment is insured. In case of loss or damage, a new cover will be sent within 2 working days of the request.
Free "Pro" consultation: In case of difficulty in use or installation, you can request technical assistance through major communication channels such as phone, fax, email or through new technological channels such as Whatsapp and iMessage at 334/1491755 or live chat.
Official 5-YEAR "NO PROBLEM" assistance: If during the first 5 years your cover shows manufacturing defects in the heat seals, you can count on our assistance within 48 hours.


MADE TO LAST
Our winter pool cover is based on the idea that if the materials are of high quality and treated correctly, it can last many years.
Reinforced: Carbon reinforcement, essential for resistance to tears and wear over time.
220gr/m2: Best weight/strength ratio to increase mobility without sacrificing strength.
Self-stabilizing: High resistance to degradation from temperature fluctuations due to thermal excursion.
Insulating: Very high capacity to maintain stable temperature to block the proliferation of bacteria.
Water repellent: Waterproofing necessary for protection from rainwater which alters the pH value.
No seams: Excellent tensile strength, a necessary feature to combat bad weather.

Prodotti correlati

Spedizione gratuita e veloce

Per gli ordini superiori a 200€ (esclusa specifica indicazione). Invio entro 48 ore.

Scopri di più

Multisupporto

Chiamaci, inviaci una mail, un messaggio o un Whatsapp al +39 3341491755

Scopri di più

Metodo di pagamento

Paga con carta di credito, Paypal, Scalapay, AmazonPay, bonifico o contanti al corriere.

Scopri di più