Complete Fiberpool 15 MC/H filtration system with 1 hp DAB pump

Pool filter unit complete with 15 mc/h Fiberpool sand filter and 1 HP Dab Euroswim 100 pump.
The perfect all-Italian combination for always perfectly filtered water.

PROFESSIONAL PRODUCT.
10-year warranty on the fiberglass filter tank.

FEATURES OF THE FIBERPOOL 15 MC/H POOL SAND FILTER

High-quality fiberglass Fiber Pool sand filter. Hand-layered to ensure maximum chemical and mechanical resistance.
All internal parts are made of PP, ABS and PVC. All bolts are made of high-strength INOX material against corrosion and mechanical load, and nuts are made of nickel-plated brass.

Supplied pre-assembled and with selector valve. Candle distribution.

• Valve = 1.5" connections
• Internal Ø = 590 mm
• Flow rate 50 m/h = 15 mc/h
• Number of sand bags = n. 6 x 25 kg (not included)

The color of the filter and valve may vary.

FEATURES OF THE DAB EUROSWIM 100 – 1 HP FILTRATION PUMP

Available in SINGLE-PHASE or THREE-PHASE version.
Specify the desired model in the order notes. High-efficiency self-priming centrifugal pumps with large capacity built-in pre-filter.
Motor completely isolated from water. Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential swimming pools.
 

Pump construction features

• Pump body and pre-filter ring nut in technopolymer reinforced with glass fibers
• Transparent and anti-oxidation pre-filter cover to ensure constant visibility over time
• Nylon filter
• Impeller in technopolymer reinforced with glass fibers, developed to ensure total coverage and isolation of the motor shaft from the pumped liquid
• Reinforced technopolymer diffuser
• Mechanical seal in carbon / alumina / NBR / AISI 316
• NBR pump body O-rings, AISI 316 steel screws and reinforcement rings
• Butterfly fill and drain plugs that do not require tools for removal and repositioning

Motor construction features

• Asynchronous motor for continuous duty (S1) with 2 poles
• Die-cast aluminum motor casing with cataphoresis surface treatment to prevent oxidation even in aggressive environments
• Support base supplied as standard with rubber feet to reduce vibrations
• Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC) and assembled internally in the terminal box for all versions.

Motor and terminal box protection degree: IP55
Insulation class: F
Ball bearings: waterproof – sealed, resistant to water and humidity.
Motor construction according to EN 60335-2-41 standards
Standard voltage: - Single-phase 220-240V 50Hz
                             - Three-phase 230/400V 50Hz

 
TECHNICAL DATA:

• Ph range = 6.5 - 8.4
• Liquid temperature range = up to 60 °C
• Maximum ambient temperature = 50 °C
• Maximum operating pressure = 2.5 Bar
• Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
• Installation = Fixed or portable in horizontal position
• Reference standard = IEC - 60364