Complete filtration system with 33 m3/h DAB Euroswim 2 HP pump on base

33 m3/h swimming pool filtration system complete with 2 hp DAB 200 pump assembled on a base.
5 aspirations and 5 mandates

Filtration system complete with filter, pump, manifolds, electrical panel, transformer and valves.
All assembled and made in ITALY.

TASCO brand tuboflex, fittings and valves.
Electrical panel and transformer compliant with the TELEMATIC brand.

The color of the filter bowl may vary depending on availability at the time.
THE TECHNICAL ROOM SUPPLY DOES NOT INCLUDE FILTER SAND.

FIBERPOOL 33 MC/H SAND FILTER FEATURES

High-quality fiberglass sand filter. Hand-laminated to ensure maximum chemical and mechanical resistance.

All internal parts are made of PP, ABS, and PVC. All bolts are made of stainless steel with high resistance to corrosion and mechanical stress, and the nuts are made of nickel-plated brass.

Supplied pre-assembled and with selector valve. Glow plug distribution.

• Valve = 2" connections
• Internal Ø = 900 mm
• Flow rate 50 m/h = 33 m3/h
• Quantity of sand bags = 15 x 25 kg (not included)

10-year warranty on the fiberglass filter bowl.

FEATURES OF THE DAB EUROSWIM 200 FILTRATION PUMP – 2 HP

Available in SINGLE-PHASE or THREE-PHASE version.
Please specify the desired model in the order notes.

High-efficiency self-priming centrifugal electric pumps with built-in large-capacity pre-filter.
Motor completely isolated from the water. Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential pools.

Construction features of the pump
- Pump body and pre-filter ring in technopolymer reinforced with glass fibres
- Transparent and anti-oxidation polycarbonate pre-filter cover to ensure constant visibility over time
- Nylon filter
- Impeller in technopolymer reinforced with glass fibres, developed to guarantee total coverage and isolation of the crankshaft from the pumped liquid
- Diffuser in reinforced technopolymer
- Mechanical seal in carbon / alumina / NBR / AISI 316
- Pump body O-ring in NBR, screws and reinforcement rings in AISI 316 steel
- Butterfly filler and drain plugs that do not require the use of tools for removal and replacement
 
Engine construction features
- 2-pole continuous duty asynchronous motor (S1)
- Die-cast aluminum motor case with cataphoresis surface treatment to prevent oxidation even in aggressive environments
- Support base supplied as standard with rubber feet to reduce vibrations
- Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC) and assembled inside the terminal box for all versions.


Motor and terminal box protection rating: IP55
Insulation class: F
Ball bearings: waterproof – resistant to water and humidity.
Engine construction according to EN 60335-2-41 standards
Series voltage: - Single phase 220-240V 50Hz
- Three-phase 230/400V 50Hz


TECHNICAL DATA:
- pH range = 6.5 - 8.4
- Liquid temperature range = up to 60 °C
- Maximum ambient temperature = 50 °C
- Maximum operating pressure = 2.5 Bar
- Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
- Installation = Fixed or portable in horizontal position
- Reference standard = IEC - 60364