Easy basic kit, DIY pool kit 3 x 13 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF AN EASYBLOK FORM STRUCTURE AND A MONOBLOCK BACKPACK FILTRATION SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete swimming pool is easy, economical, and fast. Rectangular pools with EPS walls (a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics) can be built simply and quickly. The available formats meet every construction need, while ensuring unparalleled ease of installation: it is sufficient to interlock the modules, making sure to reinforce each formwork line. Afterwards, the concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an in-ground or semi-in-ground swimming pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without needing to replace all the piping. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the restoration of existing tanks that are difficult to recover. By using the already existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monoblock that can be placed in any type of swimming pool.
The construction of the pool becomes much simpler since all the systems (skimmer, nozzles, piping, filter) are entirely managed by this monoblock, also called a "backpack filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 3 x 13 m
• Pool structure dimensions 3.50 x 13.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 39m²
• Internal perimeter 32m
• External perimeter 34m
• Volume 58.5 mc

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt gray, and medium gray (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on site with a leister or hot air gun.

MX 25 MONOBLOCK FILTER FEATURES

This compact filter block is installed at the edge level and a part of it is immersed below the water level

• Filtration pump 25m3/h – 1.1Kw
• 2 filter cartridges (filter surface 9m² - fineness 25µ)
• Projector: 30 LEDs – 4.5W
• Shell: Thermoformed ABS – PMMA
• Skimmer with two openings for water intake
• Adjustable high-flow inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air adjustment button)
• Removable cover with mechanical safety device
• Buried part that groups: The filtration pump (25 m³/h)
• Two removable filter cartridges with leaf collection baskets
• White LED projector + remote control
  

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Realization of the excavation based on the necessary dimensions
• Realization of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring structure
• Laying of reinforced PVC liner
• Installation of the backpack filtration system