Easy basic kit, DIY pool kit 5 x 7 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF AN EASYBLOK FORM STRUCTURE AND A MONOBLOC BACKPACK FILTERING SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete swimming pool is easy, economical, and fast. Rectangular pools with EPS walls can be built quickly and easily (EPS is a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity that lead to the degradation of the material's structural characteristics). The available formats meet every construction need, while guaranteeing unparalleled ease of installation: it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Subsequently, concrete is poured inside the formwork to form a real reinforced concrete wall.
With this kit, it is possible to build an in-ground or semi-in-ground pool.

The backpack filtering system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without needing to replace all the pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtering system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules 1.25 m long, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtering system. This is a professional monobloc cartridge filter that can be positioned in any type of pool.
Pool construction becomes much simpler since all the plant engineering (skimmer, nozzles, piping, filter) is entirely managed by this monobloc, also known as a "backpack filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 5 x 7 m
• Pool structure dimensions 5.50 x 7.50 m
• Structure height 1.5m
• Water height 1.40 m as required by law
• Surface area 35m²
• Internal perimeter 24m
• External perimeter 26m
• Volume 52.5 mc

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt gray, and medium gray (specify when ordering). The liner has a special lacquering that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: It is necessary to heat-seal the liner on site with a Leister or heat gun.

FILTER BLOCK FEATURES:

This compact filter block is installed at the edge level, and a part is submerged below the water level.

• Filtering pump 12m3/h – 0.5Kw
• 2 filter cartridges (filtering surface 4.5m2 - fineness 25µ)
• Shell: ABS – PMMA Thermoformed
• Skimmer with two openings for water suction
• Adjustable large flow rate return nozzle
  
  

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced PVC liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation according to the necessary dimensions
• Construction of the concrete slab
• Installation Easyblok with reinforcement
• Pouring structure
• Laying reinforced PVC liner
• Installation of the backpack filtering system