Easy basic kit, DIY pool kit 5 x 8 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND MONOBLOC BACKPACK FILTER SYSTEM. Entirely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools can be built quickly and easily using EPS walls (a "closed-cell" technology material which, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity that lead to the degradation of the material's structural characteristics). The available formats meet every construction need, while ensuring unparalleled ease of installation: it is sufficient to interlock the modules, making sure to reinforce each formwork line. Subsequently, concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, you can build an inground or semi-inground pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without having to replace all the pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
You can use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. This is a professional compact cartridge filter unit that can be placed in any type of pool.
Pool construction becomes much simpler since all the plumbing (skimmer, jets, pipes, filter) is entirely managed by this monobloc, also called a "backpack filter".

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 5 x 8 m
• Pool structure dimensions 5.50 x 8.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 40m²
• Internal perimeter 26m
• External perimeter 28m
• Volume 60 m³

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt gray, and medium gray (please specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: The liner must be heat-welded on site with a Leister gun or hot air gun.

MONOBLOC FILTER CHARACTERISTICS:

This compact filter block is installed at the edge level and a part is submerged below the water level

• Filtration pump 18m³/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: ABS – Thermoformed PMMA
• Skimmer with two openings for water suction
• Adjustable high-flow inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation based on necessary dimensions
• Creation of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack filtration system