Easy basic kit, DIY pool kit 5 x 9 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND MONOBLOC SKIMMER/FILTER SYSTEM. Entirely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools with EPS walls can be built quickly and easily (a material with "closed cell" technology that, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity which lead to the degradation of the material's structural characteristics). The available formats meet every construction need, while ensuring unparalleled ease of installation: it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Subsequently, concrete is poured inside the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an inground or semi-inground pool.

The skimmer/filter system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without needing to replace all the pipes. Simply close all outlets completely and install the skimmer/filter system, which will function as a skimmer, filtration system, and lighting (MX25).

It is possible to use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding challenging and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated concrete quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative skimmer/filter system. It is a professional cartridge filter unit that can be positioned in any type of pool.
Building a pool becomes much simpler since all the plant engineering (skimmer, nozzles, pipes, filter) is entirely managed by this monobloc, also called a "skimmer/filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 5 x 9 m
• Pool structure dimensions 5.50 x 9.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface 45m²
• Internal perimeter 28m
• External perimeter 30m
• Volume 67.5 cubic meters

DETAILS ON THE LINER (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt gray and medium gray (please specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: It is necessary to heat-weld the liner on site with a leister or hot air gun.

FILTER UNIT FEATURES:

This compact filter block is installed at the edge level and a part is submerged below the water level

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: ABS – Thermoformed PMMA
• Skimmer with two openings for water suction
• Adjustable large flow inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation of the necessary dimensions
• Construction of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the skimmer/filter system