Easy basic kit, DIY pool kit 6 x 11 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND BACKPACK MONOBLOC FILTRATION SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical and fast. Rectangular pools with EPS walls (a material with "closed cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics) can be built quickly and easily. The available formats meet every construction need, while at the same time guaranteeing unparalleled ease of installation: it is sufficient to connect the interlocking modules, taking care to reinforce each line of formwork. Afterwards, concrete is poured into the formwork to form a true reinforced concrete wall.
With this kit, it is possible to build an inground or semi-inground pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to recover existing pools without the need to replace all the pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system and lighting (MX25).
 
The entire Basic DIY kit can be used to restore existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monobloc that can be placed in any type of pool.
Pool construction becomes much simpler since all the plumbing (skimmer, jets, pipes, filter) is entirely managed by this monobloc, also known as a "backpack filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 6 x 11 m
• Pool structure dimensions 6.50 x 11.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface 66m²
• Internal perimeter 34m
• External perimeter 36m
• Volume 99 m³

LINER DETAILS (PVC LINER)

The liner is available in 4 shades: white, sand, basalt grey, and medium grey (please specify when ordering). The lining has a special lacquering that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or hot air gun.

MX 25 FILTER MONOBLOC FEATURES

This compact filter block is installed at the edge level and part of it is immersed below the water level

• Filtration pump 25m3/h – 1.1Kw
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• Projector: 30 LEDs – 4.5W
• Casing: ABS – PMMA Thermoformed
• Skimmer with two openings for water suction
• Adjustable high-flow return jet
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)
• Removable lid with mechanical safety lock
• Buried part that groups: The filtration pump (25 m³/h)
• Two removable filtration cartridges with leaf collection baskets
• White LED projector + remote control

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation based on necessary dimensions
• Construction of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring structure
• Laying reinforced PVC liner
• Installation of backpack filtration system