Easy basic kit, DIY pool kit 6 x 9 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF AN EASYBLOK FORM STRUCTURE AND A BACKPACK-STYLE MONOBLOC FILTRATION SYSTEM. Entirely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools with EPS walls can be built quickly and easily (a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics). The available sizes meet every construction need, while ensuring unparalleled ease of installation: it is sufficient to interlock the modules, making sure to reinforce each formwork line. Subsequently, concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an inground or semi-inground pool.

The backpack-style filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without needing to replace all the piping. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside, thus avoiding demanding and expensive demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack-style filtration system. This is a professional cartridge filter monobloc that can be positioned in any type of pool.
Pool construction becomes much simpler as all the systems (skimmer, inlets, piping, filter) are entirely managed by this monobloc, also known as a "backpack filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 6 x 9 m
• Pool structure dimensions 6.50 x 9.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface 54m²
• Internal perimeter 30m
• External perimeter 32m
• Volume 81 mc

DETAILS ON THE LINER (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt gray, and medium gray (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or hot air gun.

MONOBLOC FILTER FEATURES:

This compact filter block is installed at the edge level and partially submerged below the water level.

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Body: ABS – Thermoformed PMMA
• Skimmer with two openings for water suction
• Adjustable high-flow inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions
• Construction of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack-style filtration system