Easy basic kit, DIY pool kit 3 x 10 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF AN EASYBLOK CASSETTE STRUCTURE AND A MONOBLOCK BACKPACK FILTRATION SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete swimming pool is easy, economical, and fast. Rectangular pools with EPS walls (a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity that lead to the degradation of the material's structural characteristics) can be built quickly and easily. The available sizes meet every construction need, while also guaranteeing unparalleled ease of installation: it is sufficient to interlock the modules, taking care to reinforce each line of formwork. Subsequently, concrete is poured inside the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an inground or semi-inground swimming pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without needing to replace all the pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules 1.25 m long, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ per m².

The installation and management of this pool kit are made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monoblock that can be placed in any type of pool.
Pool construction becomes much simpler since all the plumbing (skimmer, nozzles, pipes, filter) is entirely managed by this monoblock, also called a "backpack filter".

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 3 x 10 m
• Pool structure dimensions 3.50 x 10.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 30m²
• Internal perimeter 26m
• External perimeter 28m
• Volume 45 mc

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt grey, and medium grey (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or hot air gun.

FILTER MONOBLOCK CHARACTERISTICS:

This compact filter block is installed at the edge level, and a part is submerged below the water level.

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtration surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: ABS – Thermoformed PMMA
• Skimmer with two openings for water suction
• Adjustable large flow return nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation based on necessary dimensions
• Construction of the concrete slab
• Installation Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack filtration system