Easy basic kit, DIY pool kit 3 x 8 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK SHUTTERING STRUCTURE AND BACKPACK MONOBLOC FILTRATION SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools with EPS walls can be built quickly and easily (a material with "closed-cell" technology which, unlike common polystyrene, ensures a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics). The available formats meet every construction need, while also guaranteeing unparalleled ease of installation: it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Subsequently, concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an in-ground or semi-in-ground pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to salvage existing pools without the need to replace all pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
The entire Basic DIY kit can be used for the restoration of existing pools that are difficult to recover. By using the existing excavation, a new pool can be built inside, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ per m².

The installation and management of this pool kit are made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monobloc that can be placed in any type of pool.
Building the pool becomes much simpler since all the plumbing (skimmer, nozzles, pipes, filter) is entirely managed by this monobloc, also known as a "backpack filter".

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 3 x 8 m
• Pool structure dimensions 3.50 x 8.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 24m²
• Internal perimeter 22m
• External perimeter 24m
• Volume 36 mc

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt grey, and medium grey (please specify when ordering). The liner has a special lacquer coating that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or hot air gun.

FILTER MONOBLOCK CHARACTERISTICS:

This compact filter block is installed at the edge level, with one part immersed below the water level.

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² – fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: ABS – Thermoformed PMMA
• Skimmer with two openings for water suction
• Adjustable high-flow return nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air adjustment button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Realization of the excavation based on necessary dimensions
• Construction of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring the structure
• Laying the reinforced PVC liner
• Installation of the backpack filtration system