Easy basic kit, DIY pool kit 3 x 9 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND MONOBLOC BACKPACK FILTRATION SYSTEM. Completely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools with EPS walls (a material with "closed cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltrations that lead to the degradation of the material's structural characteristics) can be built quickly and easily. The available formats meet every construction need, while ensuring unparalleled ease of installation: simply interlock the modules, making sure to reinforce each line of formwork. Afterwards, the concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an in-ground or semi-in-ground pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it allows existing pools to be refurbished without the need to replace all pipes. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ per m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monobloc that can be placed in any type of pool.
Pool construction becomes much simpler since all the plumbing (skimmer, nozzles, pipes, filter) is entirely managed by this monobloc, also called a "backpack filter".

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 3 x 9 m
• Pool structure dimensions 3.50 x 9.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 27m²
• Inner perimeter 24m
• Outer perimeter 26m
• Volume 40.50 mc

LINER DETAILS (PVC LINER)

The liner is available in 4 shades: white, sand, basalt gray, and medium gray (please specify when ordering). The liner has a special lacquering that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on site with a Leister or hot air gun.

FILTER MONOBLOC CHARACTERISTICS:

This compact filter block is installed at the edge level and part of it is submerged below the water level

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: ABS – PMMA Thermoformed
• Skimmer with two openings for water suction
• Adjustable large flow rate inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation according to necessary dimensions
• Creation of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack filtration system