Easy basic kit, DIY pool kit 6 x 8 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND BACKPACK MONOBLOCK FILTRATION SYSTEM. Entirely Made in Italy.

Thanks to this innovative system, building a reinforced concrete swimming pool is easy, economical and fast. Rectangular pools with EPS walls can be built quickly and easily (a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity which lead to the degradation of the material's structural characteristics). The available sizes meet every construction need, while ensuring unparalleled ease of installation: simply connect the interlocking modules, making sure to reinforce each line of formwork. Then, the concrete is poured inside the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an in-ground or semi-in-ground swimming pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without the need to replace all the piping. Simply close all the outlets and install the backpack system, which will function as a skimmer, filtration system and lighting (MX25).
 
The entire Basic DIY kit can be used for the restoration of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. It is a professional cartridge filter monoblock that can be placed in any type of pool. 
Building the pool becomes much simpler since all the plant engineering (skimmer, nozzles, piping, filter) is entirely managed by this monoblock, also called a "backpack filter".

POOL FEATURES:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 6 x 8 m
• Pool structure dimensions 6.50 x 8.50 m
• Structure height 1.5m
• Water height 1.40 m as required by law
• Surface 48m²
• Internal perimeter 28m
• External perimeter 30m
• Volume 72 m³

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt grey and medium grey (please specify when ordering). The liner has a special coating that makes it super smooth, resistant to chlorine, UV rays and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: The liner must be heat-sealed on site with a leister or hot air gun.

FILTER MONOBLOCK FEATURES:

This compact filter block is installed at the edge level and part of it is submerged below the water level.

• Filtration pump 18m3/h – 0.75Kw - 220V
• 2 filter cartridges (filtering surface 9m² - fineness 25µ)
• White LED projector with remote control: 30 LEDs – 4.5W
• Shell: Thermoformed ABS – PMMA
• Skimmer with two openings for water suction
• Adjustable large flow return nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation according to the necessary dimensions
• Creation of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack filtration system