Easy basic kit, DIY pool kit 4 x 12 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF AN EASYBLOK FORMWORK STRUCTURE AND A MONOBLOC SKIMMER FILTER SYSTEM. Entirely Made in Italy.

Thanks to this innovative system, building a reinforced concrete pool is easy, economical, and fast. Rectangular pools with EPS walls (a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity that lead to the degradation of the material's structural characteristics) can be built quickly and easily. The available formats meet every construction need, while ensuring unparalleled ease of installation: it is sufficient to interlock the modules, taking care to reinforce each line of formwork. Afterwards, concrete is poured into the formwork to create a real reinforced concrete wall.
With this kit, it is possible to build an inground or semi-inground pool.

The backpack filtration system proposed here is also ideal for pool renovations; in fact, it makes it possible to restore existing pools without having to replace all the piping. Simply close all outlets completely and install the backpack system, which will function as a skimmer, filtration system, and lighting (MX25).
 
It is possible to use the entire Basic DIY kit for the renovation of existing pools that are difficult to recover. By using the existing excavation, you can build inside it, thus avoiding demanding and costly demolitions.

Straight modules with a length of 1.25 m, 30 cm high, PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative backpack filtration system. This is a professional cartridge filter monobloc that can be placed in any type of pool. 
Building the pool becomes much simpler since all the plumbing (skimmer, inlets, piping, filter) is entirely managed by this monobloc, also called a "backpack filter."

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water mirror dimensions 4 x 12 m
• Pool structure dimensions 4.50 x 12.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface 48m²
• Internal perimeter 32m
• External perimeter 34m
• Volume 72 cubic meters

LINER DETAILS (PVC SHEET)

The liner is available in 4 shades: white, sand, basalt grey, and medium grey (please specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or heat gun.

MX 25 FILTER MONOBLOC CHARACTERISTICS

This compact filter block is installed at the edge level, and a part is submerged below the water level.

• Filtration pump 25m³/h – 1.1Kw
• 2 filter cartridges (filtering surface 9m² – fineness 25µ)
• Projector: 30 LEDs – 4.5W
• Shell: ABS – PMMA thermoformed
• Skimmer with two openings for water intake
• Adjustable high-flow inlet nozzle
• Control panel for filtration (automatic or manual) and lighting
• Balneotherapy (air regulation button)
• Removable cover with mechanical safety
• Underground section that includes: The filtration pump (25 m³/h)
• Two removable filter cartridges with leaf collection baskets
• White LED projector + remote control
  

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.

CONSTRUCTION PHASES:

• Excavation according to the necessary dimensions
• Construction of the concrete slab
• Installation of Easyblok with reinforcement
• Pouring of the structure
• Laying of the reinforced PVC liner
• Installation of the backpack filtration system