Easy kit design, DIY pool kit 3 x 5 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically, and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and the filter wall, you can build the pool of your dreams independently and without compromising on aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics.
To create the structure, simply interlock the modules, making sure to reinforce each line of formwork. Then, pour concrete into the formwork to create a real reinforced concrete wall.

With this kit, it is possible to build an in-ground or semi-in-ground pool.

The filter wall allows you to build a swimming pool in a few simple steps.
It is sufficient to build the pool basin, without any predisposition, except for the space required for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the bypass for the predisposition of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. Density PS30, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit are made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space to place the technical room, which will be connected directly to one of the pool walls.

POOL CHARACTERISTICS:

• Shape rectangular
• Type Skimmer
• Water mirror dimensions 3 x 5 m
• Pool structure dimensions 3.50 x 5.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface area 15m²
• Internal perimeter 16m
• External perimeter 18m
• Volume 22.5 m³
  
  

LINING DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt grey, and medium grey (please specify when ordering). The lining has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: It is necessary to heat-seal the liner on-site with a Leister or heat gun.

FILTER WALL CHARACTERISTICS:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Body: fiberglass
• INTEGRABLE OPTIONALS:
  - Bypass
  - Salt chlorinator
  - Automatic pH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, a footprint of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation according to the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - average 20 -25 cm with electro-welded mesh
• Installation of Easyblok with reinforcement and GS14 filter wall
• Assembly of formwork in front of and behind the filter wall (to ensure cement containment during pouring)
• Pouring of the structure
• Removal of formwork
• Installation of the polyurethane mat
• Installation of the reinforced PVC liner
• Assembly of gaskets on skimmer, nozzles, and projector

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining liner: 10 years warranty.