Easy kit design, DIY pool kit 3 x 8 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically and quickly, there is nothing better than this innovative kit!
Thanks to the ease of installation of the formwork and the filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration which leads to the degradation of the material's structural characteristics. To build the structure, it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Subsequently, the concrete is poured inside the formwork to form a real reinforced concrete wall.

With this kit it is possible to build an inground or semi-inground pool.

The filter wall allows you to build a swimming pool in a few simple steps.
It is sufficient to build the tank, without any special preparation, other than the space necessary for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump and possibly also the bypass for the preparation of electrolysis systems or a heat pump.

Straight modules 1.25 m long, 30 cm high. PS30 density, estimated concrete quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be connected directly to a wall of the tank.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water mirror dimensions 3 x 8 m
• Pool structure dimensions 3.50 x 8.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface area 24m²
• Internal perimeter 22m
• External perimeter 24m
• Volume 36 cubic meters
  
  

DETAILS ON THE LINING (PVC SHEET)
The sheet is available in 4 shades: white, sand, basalt grey and medium grey (specify when ordering). The lining has a special lacquering that makes it super smooth, resistant to chlorine, UV rays and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale and resistant to sun creams and microorganisms. Note: It is necessary to heat-seal the sheet on site with a Leister or heat gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• INTEGRABLE OPTIONALS:
  - BY Pass
  - Salt electrolyzer
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be placed, a footprint of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space of the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - an average of 20 -25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front and behind the filter wall (to ensure the concrete holds during pouring)
• Structure pouring
• Removal of formwork
• Laying of the polyurethane mattress
• Laying of the reinforced PVC sheet
• Assembly of gaskets on skimmers, nozzles and projector

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

GUARANTEES

• Electronic components: 2 years full warranty.
• Reinforced lining sheet: 10 years warranty.