Easy kit design, DIY pool kit 4 x 11 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool in a simple, economical, and fast way, there's nothing better than this innovative kit!
Thanks to the easy installation of the formwork and filter wall, you can build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that lead to the degradation of the material's structural characteristics.
To build the structure, simply interlock the modules, making sure to reinforce each line of formwork. Afterwards, concrete is poured into the formwork to create a true reinforced concrete wall.

With this kit, it is possible to build an in-ground or semi-in-ground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the tank, without any pre-arrangement, except for the space needed for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the by-pass for the predisposition of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space to place the technical room, which will be directly connected to one wall of the tank.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 4 x 11 m
• Pool structure dimensions 4.50 x 11.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface area 44m²
• Internal perimeter 30m
• External perimeter 32m
• Volume 66 cubic meters
  
  

LINING DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt gray, and medium gray (please specify at the time of order). The lining has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-welded on site with a leister or hot air gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• INTEGRABLE OPTIONALS:
  - BY Pass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is also necessary to consider the dimensions of the filter wall, which will always rest on the slab. Therefore, where you want to position the filter wall, it is necessary to consider an overall dimension of 110 cm (depth) x 90 cm (width).

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be placed: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - average 20 -25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure concrete retention during pouring)
• Structure casting
• Removal of formwork
• Laying of the polyurethane mat
• Laying of the reinforced PVC liner
• Assembly of gaskets on skimmer, nozzles, and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining: 10 years warranty.