Easy kit design, DIY pool kit 6 x 12 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration which lead to the degradation of the material's structural characteristics.
To create the structure, it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Then, concrete is poured inside the formwork to create a real reinforced concrete wall.

With this kit it is possible to build an inground or semi-inground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to create the pool, without any special preparation, except for the space needed to install the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump and possibly also the bypass for the preparation of electrolysis systems or a heat pump.

Straight modules with length 1.25 m, height 30 cm. PS30 density, estimated concrete quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even easier by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be connected directly to one wall of the pool.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water mirror dimensions 6 x 12 m
• Pool structure dimensions 6.50 x 12.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface area 72m²
• Internal perimeter 36m
• External perimeter 38m
• Volume 108 mc
  
  

LINER DETAILS (PVC SHEET)
The sheet is available in 4 shades: white, sand, basalt gray and medium gray (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: It is necessary to heat-seal the sheet on site with a leister or hot air gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• OPTIONAL INTEGRATIONS:
  - BY Pass
  - Salt electrolyzer
  - Automatic PH regulator

IMPORTANT: when constructing the concrete slab for the pool base, it is also necessary to consider the overall dimensions of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be placed, a space of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Construction of the concrete slab - average 20-25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure concrete retention during pouring)
• Structural pouring
• Removal of formwork
• Installation of polyurethane mat
• Installation of reinforced PVC sheet
• Assembly of gaskets on skimmer, inlets and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

GUARANTEES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.