Easy kit design, DIY pool kit 4 x 12 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool quickly, easily and affordably, there's nothing better than this innovative kit!
Thanks to the easy installation of the formwork and the filter wall, you can build the pool of your dreams independently without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics.
To build the structure, simply interlock the modules, making sure to reinforce each line of formwork. Afterwards, concrete is poured into the formwork to create a real reinforced concrete wall.

With this kit, it is possible to build an in-ground or semi-in-ground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the pool basin, without any pre-installations, except for the space required for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and potentially also the bypass for the predisposition of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit are made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space to place the technical room, which will be directly connected to one wall of the basin.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 4 x 12 m
• Pool structure dimensions 4.50 x 12.50 m
• Structure height 1.5m
• Water height 1.40 m as per legal standards
• Surface area 48m²
• Internal perimeter 32m
• External perimeter 34m
• Volume 72 cubic meters
  
  

LINING DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt gray, and medium gray (please specify when ordering). The lining has a special lacquering that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: It is necessary to heat-weld the liner on-site with a Leister or hot air gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• OPTIONAL INTEGRATIONS:
  - BY Pass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is also necessary to consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, a footprint of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation based on necessary clearances (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - average 20-25 cm with welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of formwork in front of and behind the filter wall (to ensure concrete containment during pouring)
• Pouring of the structure
• Removal of formwork
• Laying of polyurethane mat
• Laying of reinforced PVC liner
• Assembly of gaskets on skimmer, jets, and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining liner: 10 years warranty.