Easy kit design, DIY pool kit 4 x 5 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically, and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and the filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology that, unlike common polystyrene, guarantees a high degree of resistance to water infiltration and humidity which lead to the degradation of the material's structural characteristics.
To create the structure, it is sufficient to interlock the modules, making sure to reinforce each line of formwork. Then, the concrete is poured inside the formwork to create a real reinforced concrete wall.

With this kit, it is possible to build an inground or semi-inground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the pool basin, without any special provisions, other than the necessary space for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the bypass for the predisposition of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. Density PS30, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even easier by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space to house the technical room, which will be connected directly to one of the pool walls.

POOL CHARACTERISTICS:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 4 x 5 m
• Pool structure dimensions 4.50 x 5.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface area 20m²
• Internal perimeter 18m
• External perimeter 20m
• Volume 30 mc
  
  

LINER DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt gray, and medium gray (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: The liner needs to be heat-sealed on-site with a Leister or heat gun.

FILTER WALL CHARACTERISTICS:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• INTEGRATABLE OPTIONALS:
  - BY Pass
  - Salt electrolyzer
  - Automatic PH regulator

IMPORTANT: when constructing the concrete slab for the base of the pool, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, a footprint of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Construction of the concrete slab - on average 20-25 cm with welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure concrete containment during pouring)
• Pouring of the structure
• Removal of the formwork
• Laying of the polyurethane mat
• Laying of the reinforced PVC liner
• Assembly of gaskets on skimmer, inlets, and projector

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.