Easy kit design, DIY pool kit 5 x 13 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete swimming pool simply, economically and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltrations that lead to the degradation of the material's structural characteristics.
To create the structure, simply connect the interlocking modules, taking care to reinforce each line of formwork. Then, the concrete is poured into the formwork to create a real reinforced concrete wall.

With this kit, you can build an inground or semi-inground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to create the pool basin, without any pre-arrangement, other than the space required for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the bypass for the predisposition of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even easier by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus simplifying pool construction. Next to the pool, it will be necessary to prepare a space for the technical room, which will be directly connected to one wall of the pool.

POOL CHARACTERISTICS:

• Shape Rectangular
• Type Skimmer
• Water surface dimensions 5 x 13 m
• Pool structure dimensions 5.50 x 13.50 m
• Structure height 1.5m
• Water height 1.40 m according to law
• Surface area 65m²
• Internal perimeter 36m
• External perimeter 38m
• Volume 97 cubic meters
  
  

LINER DETAILS (PVC SHEET)
The liner is available in 4 shades: white, sand, basalt grey, and medium grey (specify at the time of order). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The liner must be heat-sealed on-site with a leister or heat gun.

FILTER WALL CHARACTERISTICS:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• OPTIONAL INTEGRABLE:
  - Bypass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be placed, it is necessary to consider an overall dimension of 110 cm (depth) x 90 cm (width).

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be placed: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - average 20-25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of formwork in front of and behind the filter wall (to ensure concrete retention during pouring)
• Pouring of the structure
• Removal of the formwork
• Laying of the polyurethane mattress
• Laying of the reinforced PVC liner
• Assembly of gaskets on skimmer, nozzles, and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining sheet: 10 years warranty.