Easy kit design, DIY pool kit 5 x 14 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete swimming pool simply, economically, and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and the filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics.
To build the structure, it is sufficient to couple the interlocking modules, taking care to reinforce each line of formwork. Subsequently, concrete is poured inside the formwork to form a true reinforced concrete wall.

With this kit, it is possible to build an inground or semi-inground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the tank, without any preparation, except for the space required for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the by-pass for the preparation of electrolysis systems or heat pumps.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit are made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be connected directly to one wall of the tank.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 5 x 14 m
• Pool structure dimensions 5.50 x 14.50 m
• Structure height 1.5m
• Water height 1.40 m in accordance with the law
• Surface area 70m²
• Internal perimeter 38m
• External perimeter 40m
• Volume 105 cubic meters
  
  

LINER DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt grey, and medium grey (specify when ordering). The liner has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to its polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: It is necessary to heat-seal the liner on-site with a Leister or heat gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• INTEGRABLE OPTIONALS:
  - BY Pass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the base of the pool, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where you want to position the filter wall, it is necessary to consider a footprint of 110 cm (depth) x 90 cm (width).

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - on average 20 -25 cm with welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure concrete retention during pouring)
• Structure pouring
• Removal of the formwork
• Laying of the polyurethane mat
• Laying of the reinforced PVC liner
• Assembly of gaskets on skimmers, nozzles, and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining: 10 years warranty.