Easy kit design, DIY swimming pool kit 5 x 6 x h 1.50, skimmer

DIY POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete swimming pool simply, economically, and quickly, there is nothing better than this innovative kit!
Thanks to the easy installation of the formwork and the filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed-cell" technology that, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltrations that lead to the degradation of the material's structural characteristics.
To build the structure, simply couple the interlocking modules, taking care to reinforce each line of formwork. Then, pour concrete into the formwork to create a real reinforced concrete wall.

With this kit, it is possible to build an in-ground or semi-in-ground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the tank, without any pre-arrangement, except for the space necessary for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the bypass for the preparation of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit are made even easier by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be connected directly to a wall of the tank.

POOL FEATURES:

• Shape: rectangular
• Type: Skimmer
• Water surface dimensions: 5 x 6 m
• Pool structure dimensions: 5.50 x 6.50 m
• Structure height: 1.5m
• Water height: 1.40 m as per law
• Surface area: 30m²
• Internal perimeter: 22m
• External perimeter: 24m
• Volume: 45 mc
  
  

DETAILS ON THE LINING (PVC SHEET)
The sheet is available in 4 shades: white, sand, basalt gray, and medium gray (please specify when ordering). The lining has a special lacquer that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: The sheet must be heat-welded on-site with a leister or heat gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• INTEGRABLE OPTIONALS:
  - Bypass
  - Salt electrolyzer
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is also necessary to consider the overall dimensions of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, it is necessary to consider an overall dimension of 110 cm (depth) x 90 cm (width).

CONSTRUCTION PHASES:

• Excavation based on the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Creation of the concrete slab - average 20-25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure the concrete holds during pouring)
• Pouring the structure
• Removal of the formwork
• Laying of the polyurethane mat
• Laying of the reinforced PVC sheet
• Assembly of gaskets on skimmer, nozzles, and projector

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced lining sheet: 10 years warranty.