Easy kit design, DIY pool kit 6 x 11 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically and quickly, there is nothing better than this innovative kit!
Thanks to the ease of installation of the formwork and filter wall, you can build the pool of your dreams independently and without compromising on aesthetics. The formwork is made of EPS, a material with "closed-cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that leads to the degradation of the material's structural characteristics.
To create the structure, it is sufficient to join the interlocking modules, taking care to reinforce each line of formwork. Afterwards, concrete is poured inside the formwork to form a real reinforced concrete wall.

With this kit, it is possible to build an inground or semi-inground pool.

The filter wall allows you to build a pool in a few simple steps.
It is sufficient to build the tank, without any pre-arrangement, apart from the space necessary for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump and possibly also the bypass for the preparation of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even easier by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything needed for water recirculation and lighting, thus facilitating pool construction. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be directly connected to one wall of the tank.

POOL FEATURES:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 6 x 11 m
• Pool structure dimensions 6.50 x 11.50 m
• Structure height 1.5m
• Water height 1.40 m as per law
• Surface area 66m²
• Inner perimeter 34m
• Outer perimeter 36m
• Volume 99 m³
  
  

LINER DETAILS (PVC LINER)
The liner is available in 4 shades: white, sand, basalt grey, and medium grey (specify when ordering). The liner has a special lacquer finish that makes it super smooth, resistant to chlorine, UV rays, and weather conditions. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sun creams and microorganisms. Note: The liner must be heat-sealed on-site with a Leister or hot air gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Shell: fiberglass
• OPTIONAL INTEGRABLE:
  - BY Pass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when creating the concrete slab for the pool base, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, it is necessary to consider a footprint of 110 cm (depth) x 90 cm (width).

CONSTRUCTION PHASES:

• Excavation according to the necessary dimensions (also consider the support space for the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Construction of the concrete slab - average 20 -25 cm with electro-welded mesh
• Installation of Easyblok with reinforcement and GS14 filter wall
• Assembly of the formwork in front of and behind the filter wall (to ensure the concrete holds during pouring)
• Structure pouring
• Removal of the formwork
• Laying of the polyurethane mat
• Laying of the reinforced PVC liner
• Assembly of gaskets on skimmer, nozzles, and projector

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

WARRANTIES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.