Leak stopper / sealant liquid - 1 liter bottle

This leak sealant liquid, when mixed with the water in a pool, allows for the partial or complete sealing of small water leaks that may occur in a liner or pipe fittings.
It also seals small cracks in concrete and resin.

1 liter can treat leaks in the range of 500 to 800 liters per day for a 50 to 60 m³ pool.
The product is biodegradable and has no effect on swimmers or nature.

Do not use if the leak is more than 1 m³ of water per day, or about 20 mm for a 5 x 10 m pool.

1. Disconnect the pump, remove any automatic pool cleaning devices.
2. Set the filter to bypass or recirculation (so water does not pass through the filter). If you do not have these options, remove the filter grids or cartridges before starting the treatment.
3. Note the water level before treatment.
4. Use the liquid (1 liter per 60,000 liters of water).
   For leaks on pool walls and bottom: pour directly into the pool closest to where the leak is located, if you have managed to find it. You can also pour it into the skimmers.
   For leaks in pipes: pour directly into the skimmers and mix thoroughly and evenly.
5. Wait half an hour and try to mix the product in the water, then restart the system (filtration) for at least 8 hours.
   
6. Resume normal treatment 24 hours later.

Swimming can also resume 24 hours after the product has been added.
If necessary, based on your observations, you can repeat the treatment a second time.

Larger leaks/losses require more extensive intervention. It is important that the water's pH is around 7.2.