Technical room with complete system of 22 m3/h DAB Euroswim 1.5 HP pump

Prefabricated technical room made of fiberglass with a 22 mc/h swimming pool filtration system complete with a 1.5 hp DAB pump.
Designed with a designer closure, featuring an easy-to-use pneumatic opening.

Room dimensions: 140 x 160 cm
Total room height: 115 cm (75 cm + 40 cm dome)


4 suction lines and 4 return lines

Filtration system complete with filter, pump, manifolds, electrical panel, transformer, and valves.
All assembled and made in ITALY.

Tuboflex, fittings, and valves from TASCO.
Compliant electrical panel and transformer from TELEMATIC.

The color of the filter tank may vary depending on current availability.
THE TECHNICAL ROOM DOES NOT INCLUDE FILTER SAND.

FIBERPOOL 22 MC/H SWIMMING POOL SAND FILTER FEATURES

High-quality fiberglass Fiber Pool sand filter. Hand-layered to ensure maximum chemical and mechanical resistance.

All internal parts are made of PP, ABS, and PVC. All bolts are made of stainless steel for high resistance against corrosion and mechanical load, and nuts are made of nickel-plated brass.

Supplied pre-assembled and with a multiport valve. Lateral diffuser system.

• Valve = 2" connections
• Internal Ø = 740 mm
• Flow rate 50 m/h = 22 mc/h
• Number of sand bags = 10 x 25 kg (not included)
  

10-year warranty on the fiberglass filter tank.

DAB EUROSWIM 150 – 1.5 HP FILTRATION PUMP FEATURES

Available in SINGLE-PHASE or THREE-PHASE versions.
Specify the desired model in the order notes.

High-efficiency self-priming centrifugal electric pumps with large-capacity built-in pre-filter.
Motor completely isolated from water. Extremely quiet and highly reliable, designed for water circulation and filtration in domestic and residential swimming pools.
 

Pump construction features

• Pump body and pre-filter ring nut made of techno-polymer reinforced with fiberglass
• Transparent and anti-oxidation polycarbonate pre-filter cover to ensure constant visibility over time
• Nylon filter
• Impeller made of fiberglass-reinforced techno-polymer, designed to ensure complete coverage and isolation of the motor shaft from the pumped liquid
• Reinforced techno-polymer diffuser
• Mechanical seal in carbon / alumina / NBR / AISI 316
• NBR pump body O-ring, AISI 316 steel screws and reinforcement rings
• Butterfly fill and drain plugs that do not require tools for removal and repositioning
  
  Motor construction features
• Asynchronous continuous duty (S1) 2-pole motor
• Die-cast aluminum motor housing with cataphoresis surface treatment to prevent oxidation even in aggressive environments
• Support base supplied as standard with rubber feet to reduce vibrations
• Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC) assembled internally in the terminal box for all versions.
  
   
  Motor and terminal box protection degree: IP55
  Insulation class: F
  Ball bearings: waterproof – sealed, resistant to water and humidity.
  Motor construction according to EN 60335-2-41 standards
  Standard voltage: - Single-phase 220-240V 50Hz
                                   
  

TECHNICAL DATA:

• Ph range = 6.5 - 8.4
• Liquid temperature range = up to 60 °C
• Maximum ambient temperature = 50 °C
• Maximum operating pressure = 2.5 Bar
• Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
• Installation = Fixed or portable in a horizontal position
• Reference standard = IEC - 60364