Technical room with complete system of 33 m3/h DAB Euroswim 2 HP pump

Prefabricated technical room made of fiberglass with a 33 mc/h swimming pool filtration system complete with a 2 hp DAB 200 pump.
Designed with a designer closure, featuring an easy-to-use pneumatic opening.

Room dimensions: 140 x 160 cm
Total room height: 115 cm (75 cm + dome 40 cm)


5 suctions and 5 returns

Filtration system complete with filter, pump, manifolds, electrical panel, transformer and valves.
All assembled and made in ITALY.

Tuboflex, fittings, and valves branded TASCO.
Electrical panel and transformer compliant with standards, branded TELEMATIC.

The color of the filter tank may vary depending on current availability.
THE TECHNICAL ROOM SUPPLY DOES NOT INCLUDE FILTER SAND.

CHARACTERISTICS OF FIBERPOOL 33 MC/H SWIMMING POOL SAND FILTER

High-quality fiberglass Fiber Pool sand filter. Hand-laminated to ensure maximum chemical and mechanical resistance.

All internal parts are manufactured from PP, ABS, and PVC. All bolts are made of high-resistance INOX material against corrosion and mechanical stress, and the nuts are nickel-plated brass.

Supplied pre-assembled and with a multiport valve. Lateral distribution system.

• Valve = 2" connections
• Internal Ø = 900 mm
• Flow rate 50 m/h = 33 mc/h
• Quantity of sand bags = n. 15 x 25 kg (not included)
  

10-year warranty on the fiberglass filter tank.

CHARACTERISTICS OF DAB EUROSWIM 200 – 2 HP FILTRATION PUMP

Available in SINGLE-PHASE or THREE-PHASE version.
Specify the desired model in the order notes.

High-efficiency self-priming centrifugal electric pumps with large-capacity built-in pre-filter.
Motor completely isolated from water. Extremely quiet and highly reliable, developed for the circulation and filtration of water in domestic and residential pools.
 

Pump construction features

• Pump body and pre-filter ring nut in techno-polymer reinforced with fiberglass
• Transparent and anti-oxidation pre-filter cover to ensure constant visibility over time
• Nylon filter
• Impeller in techno-polymer reinforced with fiberglass, developed to ensure complete coverage and insulation of the motor shaft from the pumped liquid
• Diffuser in reinforced techno-polymer
• Mechanical seal in carbon / alumina / NBR / AISI 316
• Pump body O-rings in NBR, screws and reinforcement rings in AISI 316 steel
• Butterfly fill and drain plugs that do not require tools for removal and repositioning
   
  Motor construction features
• 2-pole continuous duty (S1) asynchronous motor
• Die-cast aluminum motor casing with cataphoresis surface treatment to prevent oxidation even in aggressive environments
• Support base supplied as standard with rubber feet to reduce vibrations
• Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC) internally assembled in the terminal box for all versions.
  
   
  Motor and terminal box protection degree: IP55
  Insulation class: F
  Ball bearings: water-proof – sealed, resistant to water and humidity.
  Motor construction according to EN 60335-2-41 standards
  Standard voltage: - Single-phase 220-240V 50Hz
                               - Three-phase 230/400V 50Hz
  
  

TECHNICAL DATA:

• Ph range = 6.5 - 8.4
• Liquid temperature range = up to 60 °C
• Maximum ambient temperature = 50 °C
• Maximum operating pressure = 2.5 Bar
• Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
• Installation = Fixed or portable in horizontal position
• Reference standard = IEC - 60364