Telo invernale 18 x 9 con tubolari antivento antiribaltamento ad appoggio|per piscina 17 x 8

Telo invernale 9 x 18 con tubolari antivento antiribaltamento ad appoggio per piscina

SKU:ANTIVENTO17X8

9 x 18 winter cover with windproof, anti-tip tubes for swimming pools

Regular price: € 1.459,00
Regular price: ~~€ 2.918,00~~
Sale price: € 1.459,00

Tax included.

Winter cover fabric measuring 9 x 18 m rectangular. Secured with windproof, anti-overturn tubular supports. Patented product, exclusively available at Zavattishop.

Product variants:

Disponibile

Options:

Added Clean Cover Kit: version with tarp drain pump + drain kit € 239,00 Addition of Tarp Bag: version with container for winter tarp storage € 20,00

Descrizione

Rectangular cover, 9 x 18 m, suitable for covering in-ground pools.

Cover supplied with 27 2-meter anti-wind tubes.

5-year warranty on heat seals.

The brand new winter pool cover with anti-tip anti-wind support tubes, a Zavattishop patent, is a worldwide exclusive. These latest-generation tubes are the definitive solution for your pool. Thanks to stabilizing heat seals and ultrasonic fastening, very high ground adhesion standards are achieved.

Winter cover produced at the Poggio Rusco (Mn) factory by specialized technicians. The cover is created directly from the reinforced polyethylene roll, hand-finishing any imperfections.

Advantages of the cover with anti-wind tubes:

protects the water from debris and dirt, preventing leaves and organisms from altering the pool's pH conditions.
shields the water from sunlight, which is the main cause of chlorine evaporation and the consequent proliferation of microorganisms like algae. Can be used as a summer isothermal cover.
eliminates the need for chemicals thanks to protection from UV rays and organic substances. A shock treatment combined with winterizing agent is sufficient to face the cold.
allows for significant savings, as the system is no longer used, reducing electricity consumption and eliminating the need to purchase chemicals.

Technical features of the winter cover with anti-tip tubes:

equipped with reinforced PVC tubes, 600gr/m2, with stabilizing heat seals
fine-mesh carbon reinforcement, essential for tear resistance and wear over time
220gr/m2 PVC-coated polyethylene, best weight/resistance ratio to increase mobility without sacrificing strength
self-stabilizing, high resistance to degradation from temperature changes due to thermal excursion
very high capacity to keep the temperature stable to block the proliferation of bacteria
waterproofing necessary for protection from rainwater that alters the pH value
no seams for excellent tensile strength, a necessary feature to withstand bad weather
99% guaranteed impermeability

COMPLETE YOUR WINTER COVER BY PURCHASING THE COVER DRAIN PUMP (you can find it in related articles).

The cover drain pump should be placed in the center of the winter cover and kept constantly powered. Upon detecting a few centimeters of water, the pump activates autonomously and expels it through a drain hose. This way, the cover will always remain dry and clean.

Instructions for professional installation of the winter cover:

A space of at least 50 cm around the pool is required for the tubes to rest on and to ensure stability of the cover.
If the pool is a skimmer type, it is important to note that 20 cm of the cover is lost on each side to compensate for the difference in level between the edge and the water.
To ensure optimal stability of the cover, the ideal water level should not exceed -10cm from ground level.
Use the Clean Cover drain pump with the water drainage kit (found in related products) to limit water accumulation on the cover during heavy rains and keep the cover dry. It is also very important to prevent water from escaping from under the cover due to the principle of communicating vessels.
THE TUBES MUST BE FILLED TO 50%

N.B. If you have a saltwater pool, please remember that electrolysis significantly reduces the lifespan and resistance of the cover.

How to close the pool?

Clean the bottom of the pool with a robot
Backwash and check that the pump's pre-filter is clean
Check pH levels (7.2 / 7.6)
Perform super chlorination with Diklor Super
Add Winter Algastop to prevent algae formation
Leave the system on for at least 24 hours
Cover the pool with the winter cover
Use the cover drain pump to keep the cover dry and clean
If temperatures are high, leave the system on during the hottest hours
Leave the valves open and DO NOT lower the water level

FOR VAT REGISTERED COMPANIES, THE COVER IS 100% TAX DEDUCTIBLE

FREE insured shipping against loss and damage: The cover is shipped via express courier and the shipment is insured. In case of loss or damage, a new cover will be sent within 2 working days of the request.
FREE "Pro" Consultation: In case of difficulty in use or installation, you can request technical assistance through major communication channels such as phone, fax, email or through new technological channels such as Whatsapp and iMessage at 334/1491755 or live chat.
5 YEARS "NO PROBLEM" official assistance: If your cover shows manufacturing defects in the heat seals within the first 5 years, you can count on our assistance within 48 hours.

MADE TO LAST
Our winter pool cover is based on the idea that, if the materials are of high quality and properly treated, it can last for several years.
Reinforced: Carbon reinforcement, essential for tear resistance and wear over time.
220gr/m2: Best weight/resistance ratio to increase mobility without sacrificing strength.
Self-stabilizing: Great resistance to degradation from temperature changes due to thermal excursion.
Insulating: Very high capacity to maintain a stable temperature to block the proliferation of bacteria.
Water repellent: Waterproofing necessary for protection from rainwater that changes the pH value.
No seams: Excellent tensile strength, a necessary characteristic to withstand bad weather.