Complete Fiberpool 33 MC/H filtration system with DAB 2 hp pump

Pool filtering unit complete with 33 mc/h Fiberpool sand filter and 2 HP Dab Euroswim 200 pump.
The perfect combination, entirely Made In Italy, for water that is always perfectly filtered.

PROFESSIONAL PRODUCT.
10-year warranty on the fiberglass filter tank.


FEATURES OF THE FIBERPOOL 33 MC/H POOL SAND FILTER

High-quality fiberglass Fiber Pool sand filter. Hand-laminated to ensure maximum chemical and mechanical resistance.

All internal parts are made of PP, ABS, and PVC. All bolts are made of high-strength INOX material against corrosion and mechanical load, and nuts are nickel-plated brass.

Supplied pre-assembled and with a selector valve. Lateral distribution.

• Valve = 2" connections
• Internal Ø = 900 mm
• Flow rate 50 m/h = 33 mc/h
• Quantity of sand bags = No. 15 of 25 kg (not included)

The color of the filter and valve may vary.

CHARACTERISTICS OF THE DAB EUROSWIM 200 – 2 HP FILTRATION PUMP


Available in SINGLE-PHASE or THREE-PHASE versions.
Please specify the desired model in the order notes.


High-efficiency self-priming centrifugal electric pumps with large capacity built-in pre-filter.
Motor completely isolated from water. Extremely quiet and highly reliable, developed for the circulation and filtration of water in domestic and residential pools.
 
Pump construction features

• Pump body and pre-filter ring nut made of techno-polymer reinforced with glass fibers
• Transparent and anti-oxidation polycarbonate pre-filter cover to ensure constant visibility over time
• Nylon filter
• Impeller in techno-polymer reinforced with glass fibers, developed to ensure complete coverage and isolation of the motor shaft from the pumped liquid
• Reinforced techno-polymer diffuser
• Mechanical seal in carbon / alumina / NBR / AISI 316
• Pump body O-rings in NBR, screws and reinforcement rings in AISI 316 stainless steel
• Butterfly fill and drain plugs that do not require tools for removal and repositioning

Motor construction features

• 2-pole asynchronous motor for continuous duty (S1)
• Die-cast aluminum motor casing with cataphoresis surface treatment to prevent oxidation even in aggressive environments
• Base supplied as standard with rubber feet to reduce vibrations
• Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC), internally assembled in the terminal box for all versions.

Motor and terminal box protection degree: IP55
Insulation class: F
Ball bearings: waterproof – sealed, resistant to water and humidity.
Motor construction according to EN 60335-2-41 standards
Standard voltage: - Single-phase 220-240V 50Hz
                             - Three-phase 230/400V 50Hz

TECHNICAL DATA:

• Ph range = 6.5 - 8.4
• Liquid temperature range = up to 60 °C
• Maximum ambient temperature = 50 °C
• Maximum operating pressure = 2.5 Bar
• Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
• Installation = Fixed or portable in horizontal position
• Reference standard = IEC - 60364