Easy kit design, DIY pool kit 3 x 9 x h 1.50, skimmer

DIY SWIMMING POOL KIT CONSISTING OF EASYBLOK FORMWORK STRUCTURE AND GS14 FILTER WALL.
Completely Made in Italy.

To build your reinforced concrete pool simply, economically and quickly, there is nothing better than this innovative kit!
Thanks to the ease of installation of the formwork and the filter wall, you will build the pool of your dreams independently and without sacrificing aesthetics. The formwork is made of EPS, a material with "closed cell" technology which, unlike common polystyrene, guarantees a high degree of resistance to water and humidity infiltration that lead to the degradation of the material's structural characteristics.
To build the structure, simply join the interlocking modules, taking care to reinforce each line of formwork. Afterwards, the concrete is poured into the formwork to form a real reinforced concrete wall.

With this kit, it is possible to build an in-ground or semi-in-ground swimming pool.

The filter wall allows you to build a swimming pool in a few simple steps.
It is sufficient to build the pool, without any special preparation, except for the space required for the installation of the filter wall (or filter walls in the case of particularly large pools). The wall, in addition to filtering the water thanks to its professional cartridges with a large filtering surface, will contain the lighting, the electrical panel, the filtration pump, and possibly also the bypass for the preparation of electrolysis systems or a heat pump.

Straight modules with a length of 1.25 m, 30 cm high. PS30 density, estimated cement quantity: 0.12 m³ x m².

The installation and management of this pool kit is made even simpler by the innovative GS14 filter wall. The filter wall is installed directly on the pool wall and includes everything necessary for water recirculation and lighting, thus facilitating the construction of the pool. Next to the pool, it will be necessary to prepare a space in which to place the technical room, which will be directly connected to a wall of the pool.

POOL CHARACTERISTICS:

• Shape rectangular
• Type Skimmer
• Water surface dimensions 3 x 9 m
• Pool structure dimensions 3.50 x 9.50 m
• Structure height 1.5m
• Water height 1.40 m in accordance with regulations
• Surface area 27m²
• Internal perimeter 24m
• External perimeter 26m
• Volume 40.50 cubic meters
  
  

DETAILS ON THE LINER (PVC SHEETING)
The liner is available in 4 shades: white, sand, basalt grey, and medium grey (please specify when ordering). The liner has a special lacquering that makes it super smooth, resistant to chlorine, UV rays, and atmospheric agents. Thanks to the polyester reinforcement, it is durable, anti-limescale, and resistant to sunscreens and microorganisms. Note: It is necessary to heat-weld the liner on site with a Leister or hot air gun.

FILTER WALL FEATURES:

• Filtration pump 14m3/h – 0.5Kw
• Filter cartridge: filtering surface 4.5 m2 - fineness 25µ
• RGB Projector 270 Led – 15.9W + remote control
• Casing: fiberglass
• INTEGRATED OPTIONALS:
  - BY Pass
  - Salt chlorinator
  - Automatic PH regulator

IMPORTANT: when constructing the concrete slab for the base of the pool, it is necessary to also consider the footprint of the filter wall, which will always rest on the slab. Therefore, where the filter wall is to be positioned, a footprint of 110 cm (depth) x 90 cm (width) must be considered.

CONSTRUCTION PHASES:

• Excavation based on necessary dimensions (also consider the space for the support of the filter wall - or filter walls - on the side where it will be positioned: 110 cm depth by 90 cm width for each filter wall)
• Construction of the concrete slab - average 20 -25 cm with electro-welded mesh
• Easyblok installation with reinforcement and GS14 filter wall
• Assembly of formwork in front of and behind the filter wall (to ensure concrete retention during pouring)
• Structure casting
• Removal of formwork
• Laying of polyurethane mattress
• Laying of reinforced PVC liner
• Assembly of gaskets on skimmer, nozzles, and projector

 

N.B. TRANSPORT COST IS NOT INCLUDED IN THE PRICE.

 

GUARANTEES

• Electronic components: 2 years full warranty.
• Reinforced liner: 10 years warranty.