Small technical room MAC with a complete 15 m³/h system

Prefabricated technical room made of fiberglass with a complete 10 mc/h swimming pool filtration system.

Room dimensions: 118 x 91 x 83 cm

3 suctions and 3 returns

Complete filtration system including filter, pump, manifolds and valves.
All assembled and manufactured in ITALY.

Flex hose, fittings and valves branded TASCO.

The color of the filter tank may vary depending on availability.
THE TECHNICAL ROOM DOES NOT INCLUDE FILTER SAND.

FIBERPOOL 15 MC/H POOL SAND FILTER FEATURES

High quality fiberglass Fiber Pool sand filter. Hand-layered to ensure maximum chemical and mechanical resistance.
All internal parts are made of PP, ABS and PVC. All bolts are made of high-strength INOX material against corrosion and mechanical load, and nuts are nickel-plated brass.

Supplied pre-assembled and with selector valve. Candle distribution.

• Valve = 1.5" connections
• Internal Ø = 590 mm
• Flow rate 50 m/h = 15 mc/h
• Number of sand bags = 6 x 25 kg (not included)

10-year warranty on the fiberglass filter tank.

DAB EUROSWIM 75 PUMP FEATURES

High-efficiency self-priming centrifugal electric pumps with built-in large capacity pre-filter.
Motor completely isolated from water. Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential pools.
 
Pump construction features
- Pump body and pre-filter ring nut made of fiberglass-reinforced technopolymer
- Transparent and anti-oxidation polycarbonate pre-filter cover to ensure constant visibility over time
- Nylon filter
- Fiberglass-reinforced technopolymer impeller, developed to ensure total coverage and isolation of the motor shaft from the pumped liquid
- Reinforced technopolymer diffuser
- Mechanical seal in carbon /alumina / NBR / AISI 316
- NBR pump body O-ring, AISI 316 steel screws and reinforcement rings
- Butterfly fill and drain plugs that do not require tools for removal and repositioning
 
Motor construction features
- 2-pole continuous duty (S1) asynchronous motor
- Die-cast aluminum motor casing with cataphoresis surface treatment to prevent oxidation even in aggressive environments
- Support base supplied as standard with rubber feet to reduce vibrations
- Single-phase version with built-in thermal-amperometric protection and permanently inserted capacitor (PSC) assembled internally in the terminal box for all versions.
 
Motor and terminal box protection degree: IP55
Insulation class: F
Ball bearings: waterproof – sealed, resistant to water and humidity.
Motor construction according to EN 60335-2-41 standards
Standard voltage: - Single-phase 220-240V 50Hz
                                  - Three-phase 230/400V 50Hz

 
TECHNICAL DATA:
- Ph range = 6.5 - 8.4
- Liquid temperature range = up to 60 °C
- Maximum ambient temperature = 50 °C
- Maximum operating pressure = 2.5 Bar
- Nominal operating pressure = 0.8 - 1.2 Bar (ideal 1 Bar)
- Installation = Fixed or portable in horizontal position
- Reference standard = IEC - 60364

TECHNICAL CHARACTERISTICS