9999059 Dolphin Maytronics 2x2 Gyro pool robot with Wonderbrush Set for tile pool

The New Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner by Maytronics

The Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner is the ideal solution for cleaning large Commercial pools up to 60 metres in length. The 2 x 2 has two operating modes - Manual and Automatic. In Manual mode, the remote control can be used to direct the 2 x 2 to areas requiring special attention. The Automatic mode allows the 2 x 2 to learn the pools dimensions and computes a precise path to clean the entire pool floor and wall.

The Dolphin 2 x 2 Pro Gyro Commercial Pool Cleaner is a heavy duty cleaner for comercial pools. It cleans the pool floor, walls and waterline. Advanced software ensures systematic cleaning and optimal pool coverage. 

With Wonderbrush set for pools covered in tiles, mosaic, repainted cement.

The Dolphin 2 x 2 allows you to programme data via the remote control such as: 

• Pool length - 30, 40, 50 and 60 metres
• Pool shape - 90 degree corners, Hexagonal, Octagonal, Circular and Oval
• Cycle time - 10, 12, 14 and 16 hours
• Climbing / Non Climbing of pool walls or floor only

Benefits of the Dolphin 2 x 2 Pro Gyro Pool Cleaner with Wonderbrush Set: 

• User-friendly remote control for manual navigation and programmable command
• Powerful suction and sweeping, evenly disperses chlorine and other chemicals in the pool and helps to eliminate algae and germs
• Two large self contained ultra fine micronic filter bags collect dirt, debris and even fine dust particles
• Patented swivel prevents cable from tangling
• Low voltage motor - minimal power consumption
• Cycle time - 10, 12, 14 and 16 hours
• Cable length 40m. + Swivel and New Heavy Duty Caddy and Transformer
• Suction rate of: 32m³/h
• Complete with combinated brushes
• Comes with a 2 year warranty 

Options to choose between:

• Automatic cleaning (self-programming).
• User friendly remote control operation. The automatic scanning program can be modified and customized by the end user according to his needs by modifying the following parameters and cleaning programs:
• Regular (Regular) ?? cleaning program for floors and walls
• Ultra Clean? Slower movements for a more thorough cleaning
• Climbing (Climbing) ?? This option controls the frequency of climbing on the wall eg: at what frequency the DOLPHIN should climb on the walls. The default mode is non-climbing mode

Technical specifications

• Speed calculated on the floor 900 m / h
• Scanned percentage calculated 700 m2 / hour
• Pumping capacity (automatically controlled) 32 m3 / hr
• Filter bag
• Filter area (2 filter bags) 15,500 cnv
• 50 microns porosity
• Current consumption 170 W
• 27 VDC voltage
• Current 7 Amp
• Water resistance IP 54 (submersible)
• Input power supply 100 V / 115 V / 230 V - Output 27 VDC
• Capacity 330 W
• Electronic control
• Solid state digital motors
• Microcomputer brings 40 S.M.D.
• Self-monitoring
• Automatic switch-off
• Wireless remote control unit
• Transmission up to 50 m.
• 2 AAA batteries.
• Controller with user adjustable program.
• Remote control with manual programming.
• Robot weight (without cable) 18.80 kg.
• Cable length 40 m.