Maytronics 99956086-ASSY | IoT transformer for Dolphin pool robots

Dolphin Maytronics 230V IoT transformer.


It allows the robot to start and stop and through the My Dolphin Plus application it is possible to select many other functions depending on the cleaner model: programmable cleaning, work cycle selection, delayed start, manual cleaning, clogged filter indicator , pick me up function (facilitates the extraction of the robot from the pool).

The application is accessible both Wi-Fi and Bluetooth.

12 MONTHS WARRANTY

Low energy consumption.

Compatible with the following Dolphin robot cleaners:

• Dolphin Formula 40i
• Dolphin PoolStyle 40i
• Dolphin E40i
• Dolphin Carrera 40i
• Dolphin S300i
• Dolphin Energy 300i
• Dolphin Zenit Z3i
• Dolphin Seamaster INT
• Dolphin Blue Maxi 40i
• Dolphin Avalon 40i
• Dolphin Cainan 3i
• Dolphin Hammer i
• Dolphin Wolly 40i
• Dolphin E50i
• Dolphin SL 300i
  

Power cable with part number D58984401LF is not included, see related products if you want to buy it.

MyDolphin™ Plus App

The app is compatible with the following smart devices:

• Apple (iOS) – version 10 and up – iPhone, iPad, iPod
• Android – version 5 and up operating system
  
  

1. Make sure your mobile smart device (phone/tablet) is connected to your home/pool Wi-Fi® network.
2. Make sure you have your Wi-Fi® network name and password in reach.
3. Ensure Bluetooth® is enabled on your smart device.
4. Android users - please make sure your GPS and Location Services are ON.
5. For iOS 13 only - while the app is working, enable Bluetooth® & location.
6. Please make sure your router is on 2.4Ghz Wi-Fi® frequency only.

Prepare the Pool Cleaner for Connection

1. Connect the Pool Cleaner to the power supply.
2. The connectivity LED light indicator on your power supply will start flashing blue.
3. Place the Pool Cleaner in the water.
4. Press the ON button on your IoT power supply, to start the Pool Cleaner.

Activate the Pool Cleaner Using your Mobile Smart Device

1. Activate the MyDolphin™ Plus app.
2. Click Agree and allow all the required permissions.
3. Sign up by creating an account or use your Gmail/Facebook accounts.
4. Scan the QR code located on the side of the power supply.
5. Alternatively, press "Search for your robot manually" to pair with your Pool Cleaner. The app will start pairing with your power supply.
6. Wait for the steady blue connectivity LED light and a success message in the app.
7. Connect to your home/pool Wi-Fi® network.
8. Enter the password of your home Wi-Fi® network, and press CONTINUE. After a short while, your power supply will flash green and blue.
9. Wait for the steady green connectivity LED light and a success message in the app.
   
   NOTE: Please make sure to fill in the Warranty details and name your Dolphin Pool Cleaner.
   
   

LED Lights

• Connectivity LEDs
  The connectivity LED light on the power supply has several modes:

1. Flashing blue light - waiting for Bluetooth® connection.
2. Steady blue light - connected via Bluetooth®.
3. Flashing green light - power supply is trying to connect to your home/pool Wi-Fi® network and cloud, or a weak internet signal.
4. Steady green light - power supply is now connected to the Wi-Fi® network and to the cloud.
5. Alternating blue and green light - power supply is connected via Bluetooth® and trying to connect to your home/pool Wi-Fi® network & cloud.

• On/Off LEDs

1. Flashing green light - waiting for the next operation (delay mode or weekly timer).
2. Alternate blue/green/red lights – program updating remotely.
3. Please wait until process is completed.
4. Steady red light – fault. Refer to troubleshooting.

• Tips

1. If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
2. To test your Wi-Fi® signal strength and quality, play a video via your smart device browser.