Maytronics 9995679-ASSY - Power unit timer bluetooth for Dolphin with remote €209.00
Rating:
93 % of 100

Maytronics 9995679-ASSY - Power unit timer bluetooth for Dolphin with remote

SKU
9995679-ASSY
€209.00
0
Transformer Dolphin Maytronics with weekly timer and bluetooth for robot with remote control. 220-230V / 29V DC. Output 180W.
With full filter sensor, it warns you with a warning light when it is time to wash the filter.
12 MONTHS WARRANTY

Details

Maytronics Dolphin power unit with weekly timer. 220-230V / 29V DC. Output 180W.
Possibility to decide the automatic start of the cleaner - every day - every two days - every 3 days

Control with MyDolphin ™ App from smartphone: status of functionality and mode of operation
MyDolphin ™ app allows you to set the cleaning program, including manual navigation to direct the robot to clean specific areas of the pool.

For cleaning robots with remote control.
Equipped with a full filter sensor: a warning light warns you when it is time to clean the cartridge filter of the robot.

 12 MONTHS WARRANTY

Specific spare part for the following models:

  • Dolphin Supreme M500 with Bluetooth, Timer & Remote Control

  • Dolphin Zenit 30 with Bluetooth, Timer & Remote Control

  • Dolphin Kaptur 500 with Bluetooth, Timer & Remote Control

  • Dolphin Maximus X90 with Bluetooth, Timer & Remote Control

     

 

Double insulation with thermal protection switch.
Prevents and protects the cleaner robot in case of sudden changes or power failures.

Power cable not included

 

Full filter bag indicator

The power supply is equipped with a filter bag status indicator.

The red LED indicates two filter conditions:

  • When blinking – The filter is partially blocked.
  • When lighted – The filter is blocked and must be emptied and cleaned.


If the LED does not turn off after the filter had been emptied and cleaned, press the RESET button while the robot is working.


Setting The Weekly Timer

The power supply has a weekly timer control. It allows you to set an automatic cleaning schedule for the week ahead.
By pressing the SELECT button you can choose a pool cleaning schedule for the coming week.

Important: The robot will always begin to work upon set-up.

  • LED 1 – The robot will automatically work every day for a full cycle – 7 times a week.
  • LED 2 – The robot will automatically work every other day for a full cycle – 4 times a week.
  • LED 3 – The robot will automatically work every 3 days – 3 times a week.


While the robot is working in weekly timer mode, the LED will blink constantly between cycles.
At the end of the week the power supply automatically switches off. You must then reschedule the robot for the next week.


MyDolphin™ Smartphone app

MyDolphin™ is an easy-to-use app for controlling your Dolphin robotic pool cleaner remotely using Bluetooth®. You can activate cleaning programs and the weekly timer, navigate manually, and much more.
You can install and operate the MyDolphin™ app on all the most common mobile devices and operating systems, iOS and Android, including tablets.


Initial operation

  1. Make sure the Dolphin's power supply is connected to the Dolphin pool cleaner and an electrical outlet, and that the Dolphin robot is in the pool. Upon initial operation, it will perform the self-system diagnostic sequence.
  2. Make sure Bluetooth® is active on your smartphone and download and activate the MyDolphin™ app. Once downloaded, the app searches for and displays the serial number of the nearest Dolphin robot.
  3. Click on the Dolphin serial number displayed on your screen.
  4. Register by entering your email address and creating a password. Your smartphone will then finalize the Bluetooth® pairing sequence.


 
Dashboard screen

Get a quick glimpse of your Dolphin's operational status, and easily set up each of the MyDolphin™ app features.
The top indicator bar shows functional information, including on-off status, signal strength and error notifications.
The main screen window shows the operational status and information and selected
cleaning mode.
The buttons on the lower half of the screen show the available operation modes: manual drive and info/links.


Manual navigation

You can use the MyDolphin™ app to manually maneuver your Dolphin into specific areas and corners of your pool, by dragging the handle in the desired directions. In this way, you can quickly and e_ciently clean hard-to-reach spots. You can also switch to Tilt mode for a more playful and realistic experience, and maneuver your Dolphin by tilting the smartphone in various angles.


More Information

More Information
Call for price No

Reviews 1

0 / 5.0

Leave a review
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account