Seamaid 502433 PAR56 Swimming pool light, 45 white Led, 11W

New SeaMaid cool light LED lamp with flat optics and standard PAR 56 universal joint.

This item is designed for replacing the existing 300W halogen incandescent lamp. Installation in a floodlight with PAR 56 joint.

Technical Features:

• Swimming pool light model PAR 56 with excellent waterproof performance and stainless steel screws;
• 1050 lumen LM, 12V AC / DC;
• IP 68 guaranteed;
• T(Kelvin) 6500K;
• Duration: 10.000 hours;
• Replaces 300W halogen lamps.

This pool lamp combines ease of installation and use with the high quality of SeaMaid products.

This is possible thanks to careful analysis and the constant evolution of production systems, which aim to meet the needs of consumers more and more.

• Resistant: Made with injected polycarbonate for an optimal resistance to impacts, heat and chemicals for water treatment.
  
• Safe and reliable: Specially designed for acquatic lighting, offers a uniform distribution of light. It's not danger to the eyes, in fact complies with the photobiological safety standard EN 62471, classifying as "0" risk.
  
• Cheap: Thanks to LED, offers energy savings for both users and professionals in the pool construction phase. For installation of a PAR56 SeaMaid lamp is necessary a cable of 2x1,5 mm² connected to a 20V AC transformer.
  

• Always make sure that the headlamp power cable connection is completely waterproof. If replacing a PAR56 lamp, it is important to change also the headlamp joint, which may have overheated and deformed.
• Always use connectors that ensure an optimal contact of electric cables. Make sure that the connection is completely waterproof and use IP68 connectors or add insulating gel in the connection box.
• Always connect the pool light to a insulating safety transformer with double winding; the output voltage should be 12 volts. If the secondary voltage is unstable or above regulatory tolerances, it is necessary to install a stabilizing and/or limiting instrument before the electrical box.

Please note: These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful than the total absorbed power. During assembly, it is recommended to oil the back of the lamp (using the lubricating tube provided) to facilitate the attachment of the sealing bell and, if necessary, replace the sleeve. The lamps, which have an IP68 degree of protection, should be placed in a luminaire housing with a PAR56 socket, at a maximum immersion depth of 1 meter.