Seamaid 502594 PAR56 standard LED headlamp, 81 Led RGB with remote control 11W

PAR 56 model pool light with excellent waterproof performance and stainless steel screws.

Technical Features:

• 450 lumen LM, 12V AC / DC;
• IP 68 guaranteed;
• T(Kelvin) RGB;
• Duration: 15.000 hours;
• Replaces 300W halogen lamps.
  

Enhance your pool with SeaMaid headlamp. This item offers a wide range of colours and programs to set the perfect mood for any occasion!

• Resistant: Made with injected polycarbonate for an optimal resistance to impacts, heat and chemicals for water treatment.
• Safe and reliable: Specially designed for acquatic lighting, complies with the photobiological safety standard EN 62471, classifying as "0" risk for eyes.
• Cheap: Thanks to LED, offers energy savings for both users and professionals in the pool construction phase. For installation of a PAR56 SeaMaid lamp is necessary a cable of 2x1,5 mm² connected to a 20V AC transformer.
• The new remote control, with a modern design, has a built-in antenna on the circuit board to ensure a stable sign. Each remote control version is compatible with all RGB SeaMaid lamps and spotlight.

• Always make sure that the headlamp power cable connection is completely waterproof. If replacing a PAR56 lamp, it is important to change also the headlamp joint, which may have overheated and deformed.
• Always use connectors that ensure an optimal contact of electric cables. Make sure that the connection is completely waterproof and use IP68 connectors or add insulating gel in the connection box.
  
• Always connect the pool light to a insulating safety transformer with double winding; the output voltage should be 12 volts. If the secondary voltage is unstable or above regulatory tolerances, it is necessary to install a stabilizing and/or limiting instrument before the electrical box.

Please note: These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful than the total absorbed power. During assembly, it is recommended to oil the back of the lamp (using the lubricating tube provided) to facilitate the attachment of the sealing bell and, if necessary, replace the sleeve. The lamps, which have an IP68 degree of protection, should be placed in a luminaire housing with a PAR56 socket, at a maximum immersion depth of 1 meter.