Seamaid 502679 PAR56 Ecoproof led pool lamp 90 RGB LEDs with 17W remote control

SeaMaid LEDINPOOL - Renovation

PAR56 Ecoproof Led lamp with new ergonomic remote control, watertight technology and new flat optic with high luminous performances.
The lamp is suitable for the renovation of swimming pools whose headlight in ABS has been damaged.

Compatible with any niche thanks to the special adapter kit (available separately).

Equipped with a rear linkage chamber, PAR56 SeaMAID Ecoproof lamp is 100% waterproof.

Of universal size, it fits perfectly in place of a 300W incandescent or LED lamp.
This world-wide innovation offers advantages for construction, renewal and replacement.

PS: this lamp is the new version that replaces the old Ecoproof RGB lamps with 270 LED on / off (code 502242) and with remote control (code 502266). It also replaces the 30W High Power versions with and without remote control (code 502280 and 502297) of the previous years.

Pool light with the best quality / price ratio on the market. Competitive prices and high yield. To illuminate and color your pool in a simple and economical way.

This lamp allows to illuminate a pool up to 10 x 5 meters in a perfectly harmonious and unobtrusive manner.


The new remote control, with a modern and captivating design, is equipped with an integrated antenna on the electronic board whose signal is no longer altered by the user's hand (human magnetic field).

Each remote control version is compatible with all other versions of RBG lamps and projectors.


To fasten this new lamp to the crown of the projector, simply screw on the supplied brackets. This allows for labor and material savings, thanks also to:

• Elimination of the back
• Eliminating the joint
• Removal of the cable gland
• Reduction of the number of screws in stainless steel

On existing pools, it is possible to install the lamp without necessarily replacing the niche by purchasing the lighthouse niche adapter kit (consisting of an ABS crown, three adjustable metal tabs and screws) making the universal solution.

To allow installation in almost all niches in the market, each ECOPROOF lamp is supplied complete with 4 brackets + 4 M5x20 nylon screws to guarantee the perfect maintenance of the lamp in the original crown of the projector.


Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products. Two built-in screw-in terminals guarantee the strength of the 12V power cable connection.
Reliable and safe: pool light developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Development of the lamp body with modification to the connectors to also allow an insulation with resin and rear cap with special for high frequency welding.
Economical: The LED light allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2x1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp. This allows for savings on materials and labor.


SPECIFICATIONS:

• Color temperature: Multicolored RGB
• N. of LEDs: 90
• Programs: 11 fixed colors and 5 automatic programs
• Power on / off: on / off + 433 Mhz radio control
• Luminous efficiency: 600 lm
• V. / Hz.: ~12v / 50-60Hz
• Power: 16W
• Ra / CRI:> 70
• Lighting range: 120 °
• Energy class: A +
• Insulation class: CLASS III
• Degree of protection: IP68 (1m)
• LED life:> 15,000 hours
• On / Off cycles:> 100,000
• Use: only for underwater use
• Materials: cutting, optics and polycarbonate plug-in (PC). Nylon nut (PA).
• Connection: 2 metal screw poles
• 3 gaskets for cable section 7, 9 and 13 mm

REMOTE CONTROL OPERATION
The system offers 16 programs including 11 static colours and 5 automatic modes. The control is made manually by the remote controller provided and also short cuts of the current.
Each fast cut of the current (less than 2 seconds) makes change the programs. After a cut of more than 10 seconds, the lamp retains the last program used.
The use of the remote controller requires positioning in front of the lamp at a maximum distance of 10 meters, with the antenna unfolded. The presence of metal near the projector or too deep immersion can restrict the use of the remote control even at a very short distance from 1 to 2 meters.
The first use of the remote control requires a configuration with its receiver.

Remote control configuration procedure:

• Install the battery in the remote controller and switch on the projector
• Switch it OFF for a minimum of 20 seconds and turn ON the current again
• Make fast OFF/ON/OFF/ON from the power supply of the lamp(s)
• Press the buttons O & S together during 5 second
• Each lamp connected flash several times to valid the pairing and keep a static colour

Press several times the button C or P until obtaining the colour or the desired program.



INSTALLATION RECOMMENDATIONS:
These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful than the total absorbed power.

If your headlight body is in good condition and you simply need to replace the old PAR56 lamp then we advise you to buy the SeaMaid STANDARD PAR56 lamp cod. 502815 (white led) or cod. 502839 (RGB with remote control) ---> SEE RELATED ARTICLES