SeaMaid 502877 Multicolor RGB pool flat projector with remote control 90 Led 16W

SeaMaid LEDINPOOL - Construction

Universal flat projector without niche, RGB led with new ergonomic remote control, compatible with any type of pool and any structure.
It can be installed simply by screwing it on a wall loop with 1 "½ connection.
Light up your pool to make your bath in the pool safe and comfortable even at night!
The SeaMAID flat projector is ideal for new pools equipped with a PVC liner in which a PAR56 type lighthouse could create watertight problems.

The passage of the cable takes place inside the through-wall up to the junction box, with a total watertight seal.
ABS base to screw through the wall.

It is possible to buy the complete throught-the-wall kit separately -> SEE RELATED PRODUCTS


PS: this projector is the new version that replaces all the old RGB on / off projectors (code 501191) and RGB with remote control (code 501184) of the previous years.

Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products.
Reliable and safe: pool lamp developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Economical: The LED light allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2x1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp. This allows for savings on materials and labor.

The new remote control, with a modern and captivating design, is equipped with an integrated antenna on the electronic board whose signal is no longer altered by the user's hand (human magnetic field).

Each remote control version is compatible with all other versions of RBG lamps and projectors.

SPECIFICATIONS:

• Color temperature: multicolour RGB
• N. of LEDs: 90
  
• Programs: 11 fixed colors and 5 automatic programs
  
• Power on / off: on / off + 433 Mhz radio control
  
• Luminous efficiency: 600 lm
  
• V. / Hz.: ~12v / 50-60Hz
  
• Power: 16W
  
• Ra / CRI:> 70
  
• Lighting range: 120 °
  
• Energy class: A +
  
• Insulation class: CLASS III
  
• Degree of protection: IP68 (1m)
  
• LED life:> 15,000 hours
  
• On / Off cycles:> 100,000
  
• Use: only for underwater use
  
• Materials: polycarbonate support and optics (PC)
  
• Cable: HO7RNF 2m, 2x1.5mm²
  
• Connection: 2 metal screw terminals

Warranty: 3 year (must be activated online)

• Low energy consumption
• Saves work during installation
• Long lifespan
• No risk of overheating
• No risk to eyes
• Safe for children
• Easy to install, and easy to use
• TUV certified

REMOTE CONTROL OPERATION
The system offers 16 programs including 11 static colours and 5 automatic modes.
The control is made manually by the remote controller provided and also by short cuts of the current.
Each fast cut of the current (less than 2 seconds) makes change the programs. After a cut of more than 10 seconds, the lamp retains the last program used.
The use of the remote controller requires positioning in front of the lamp at a maximum distance of 10 meters, with the antenna unfolded. The presence of metal near the projector or too deep immersion can restrict the use of the remote control even at a very short distance from 1 to 2 meters.
The first use of the remote control requires a configuration with its receiver.

Remote control configuration procedure:

• Install the battery in the remote controller and switch on the projector
• Switch it OFF for a minimum of 20 seconds and turn ON the current again
• Make fast OFF/ON/OFF/ON from the power supply of the lamp(s)
• Press the buttons O & S together during 5 second
• Each lamp connected flash several times to valid the pairing and keep a static colour

Press several times the button C or P until obtaining the colour or the desired program.


Easy to install:Having a 1.5 "male thread as a fastening system, no specific tool is needed for installation. All you need is a 1.5 ”suction nozzle and manually screw the rear part of the flat headlight. The power cable that passes through the nozzle must reach a junction box by means of a hermetic sheath (lighting kit supplied with 2 meters of HO7RNF 2 × 1.5 mm² cable) and with a special installation kit.

N.B.: These swimming pool lamps must be connected to an insulating safety transformer with double coil with a power greater than at least 20% of the total absorbed power.