Tubolar projector Seamaid 9 led RGB

The tubular projector was created to illuminate the spa, pool ladders or submerged beaches.
It is a product to be installed during the construction phase, the SeaMAID mini projector highlights specific areas of the pool.

Once screwed into the suction nozzle, this projector disappears into the wall, making it very discreet and impressive. It is installed by screwing it into a suction nozzle or into a wall opening with a 1.5 '' thread.

FEATURES
Size = 50 mm
Color = RGB
Luminous flux = 360lm
Number of LEDs = 9
Power = 8 WATTS




These swimming pool floodlights must be connected to a double coil insulating safety transformer whose power is at least 20% higher than the total power absorbed by the connected floodlights. It is important to check the compatibility of the suction nozzle before final assembly. Some models equipped with a thread stop system are not suitable. The bulkhead will be connected to the junction box by means of a watertight tube. It is recommended to use SeaMAID connection accessories that allow you to ensure perfect watertight integrity of the installation.

Wrap the excess cable in the junction box to allow for future replacement of the projector out of the water.

As an option, it is possible to install a radio switch between the projector (or group of projectors) and the transformer, to remotely control them or synchronize a multiple installation.