Kit standard 30 Kg chemicals for swimming pool

Complete kit of chemicals for the maintenance of your pool. It consists of:
10 kg Chlorine - 10 kg reducer PH - 10 liters of algaecide + Test-kit for water proof

Specific product for disinfection of your pool public or private.
Certified product.

ALGAECIDE
Concentrated non-foaming algaecide and
Applications: Prevents and eliminates fungi, algae and bacteria. Exerts a very strong action algaecide, antifungal and bactericidal synergistic to chlorine, without giving rise to phenomena of acquired resistance. The antialgae exerts a strong flocculating power.
Use and dosage: Initial treatment: 50-100 gr / mc - Maintenance: 20-30 gr / mc.
Use with appropriate dosing systems or dispersed directly in the pool.
Composition: Poliquaternari ammonium long chain 5-15%.
Warnings and notes information: Biodegradability 90%.

CHLORINE GRANULAR 63%
Applications: Dichloro 63 is a quick-dissolving stabilized chlorine to be used for the disinfection of pool water. Product with high stability to photolysis and evaporation, develops a chlorine solution acidic with consequent reduction of the consumption of the corrector acid. The chlorine, in addition to disinfection, also exerts an oxidizing function, thus eliminating the organic substances not filterable.
Use and dose: Of chlorine 63 can be used manually or mechanically, by means of a metering pump connected to a small tank containing the solution of chlorine and water.
DOSAGE: Maintain the chlorine content between 1.3 and 1.5 ppm (from 2 to 2.4 grams / cubic meter of dichloro isocyanurate sodium to 63%).
Shock Treatment (break point): from 5 to 10 ppm depending on the concentration of combined chlorine (from 8.4 to 16.5 g / cubic meter)
CONSUMPTION: Consumption can vary from 1 to 3 ppm as a function of temperature, the nature of water and frequency system.
Composition: Chlorine
Warnings and information notes: Store in dry and ventilated place. Keep the packaging sigilati and away from other chemicals. Handle with adequate means of protection for the eyes and the respiratory tract.

PH REDUCER
Corrector acid pH of powder for pool
Applications: Solid yellowish for the reduction and stabilization of the pH. It is advisable to pre-dissolve the product in a bucket of water and then add the solution in the pool.
Use and dosage:
For waters with high alkalinity: 300 - 400 gr per 100 m3 of water to lower the pH by 0.1 units
For waters medium alkalinity: 200 to 300 g per 100 m3 of water to lower the pH by 0.1 units
Composition: Sodium bisulfate
Warnings and information notes: Corrosive. Causes burns. Irritating to respiratory system. Wear suitable gloves.

Our products are registrated at the Italian Institute of Health (Istituto Superiore di Sanità, ISS) with the following codes: Chlorine 15700-9, Ph Reducer 17800-5, Algaecide 64800-4.